Yamaha RX-V381, Owner'S Manual

Page: 65 / 87

Configuring the system settings (ADVANCED SETUP menu)
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z
(power).
(power) z
STRAIGHT PROGRAM
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press
z
(power) to set the unit to standby mode and turn it on
again.
The new settings take effect.
ADVANCED SETUP menu items
Note
Default settings are underlined.
Item Function Page
SP IMP.
(U.S.A. and Canada models only)
Changes the speaker impedance setting.
p.65
REMOTE ID Selects the unit’s remote control ID. p.66
TU
(Asia, Taiwan and General models only)
Changes the FM/AM tuning frequency setting.
p.66
TV FORMAT Switches the video signal type of HDMI output. p.66
4K MODE Selects the HDMI 4K signal format. p.66
INIT Restores the default settings. p.67
UPDATE Updates the firmware. p.67
VERSION Checks the version of firmware currently installed on the unit. p.67
Changing the speaker impedance setting (SP IMP.)
(U.S.A. and Canada models only)
VOL.
MUTE ENHANCER STEREO TUNED SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC VIRTUAL SP IMP.••8¬MIN
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
Settings
6
Ω
MIN Select this option when you connect 6-ohm speakers to the unit.
8
Ω
MIN Select this option when you connect 8-ohm or higher speakers to the unit.
En
65