Yamaha RX-V3075 Owner'S Manual Download Page 117

Page: 117 / 169

CONFIGURATIONS

➤

Configuring various functions (Setup menu)

117

Video

Configures the video output settings.

■

Analog to Analog Conversion

Enables/disables the video conversion (p.154) between the analog video jacks
(COMPONENT VIDEO, S VIDEO and VIDEO).

Settings

• This function works only when “Monitor Out Assign” (p.123) is set to “Main” (default) and “HDMI OUT2

Assign” (p.124) is set to “Main” (default) or “Zone4”.

• The unit does not convert 480-line and 576-line video signals interchangeably.

• Only 480i/576i-resolution video signals can be output from the S VIDEO and VIDEO jacks (p.154).

■

Video Mode

Enables/disables the video signal processing (resolution, aspect ratio and video
adjustments).

Settings

• When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to

reduce video output delay.

❑

Resolution

Selects a resolution to output HDMI video signals when “Video Mode” is set to
“Processing”.

Settings

• If you need to select a resolution that is not supported by your TV, set “MONITOR CHECK” (p.131) in the

“ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on
your TV normally.)

❑

Aspect

Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to
“Processing”.

Settings

• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or

2160p (4K) signals.

Off

Disables the video conversion between the analog video jacks.

On (default)

Enables the video conversion between the analog video jacks.
Converted video signals are output from the MONITOR OUT jacks
only.

Direct (default)

Disables the video signal processing.

Processing

Enables the video signal processing.
Configure the settings in “Resolution”, “Aspect” and “Adjustment”.

Through

Does not convert the resolution.

Auto (default)

Selects a resolution automatically in accordance with TV resolution.

480p/576p, 720p,
1080i, 1080p, 4K

Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)

Through (default)

Does not convert the aspect ratio.

16:9 Normal

Outputs 4:3 video signals to a 16:9 TV with black bands on either side
of the screen.

Summary of Contents for RX-V3075










































































































































































Search results

Summary of Contents for RX-V3075

Reviews:

Related manuals for RX-V3075

Brands by name

Popular brands

Yamaha RX-V3075, Owner'S Manual

Search results

Summary of Contents for RX-V3075

Reviews:

Related manuals for RX-V3075

Brands by name

Popular brands