Yamaha RX-V3075, Owner'S Manual

Page: 131 / 169

CONFIGURATIONS
➤
Configuring the system settings (ADVANCED SETUP menu)
En
131
5
Press ENTER to confirm the setting.
Once the remote control ID is registered successfully, “OK” appears in the display
window.
If “ERROR” appears, registration failed. Repeat from step 3.
6
To exit from the setup menu, press SETUP.
• The registered remote control codes (p.133) are not cleared even if you change the remote control ID.
Switching the video signal type (TV FORMAT)
Switch the video signal type of the unit so that it matches to the format of your TV.
Settings
NTSC, PAL (default)
Removing the limitation on HDMI video output
(MONITOR CHECK)
The unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jack.
Disable the monitor check function if you want to specify a resolution in “Resolution”
(p.117) when the unit cannot detect the TV’s resolution or when you want to specify a
different resolution than the detected resolution.
Settings
• Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV
after “MONITOR CHECK” has been set to “SKIP”.
Backing up/recovering the settings (RECOV./BACKUP)
Creates backup of the settings of the unit, or recovers the settings from the backup.
■
Backup/recovery procedure
1
Press STRAIGHT repeatedly to select “BACKUP” or “RECOVERY” and press INFO
to start the process.
Choices
Restoring the default settings (INITIALIZE)
Restores the default settings for the unit.
Choices
YES (default)
Enables the monitor check function. (Outputs video signals with a
resolution supported by the TV only.)
SKIP
Disables the monitor check function. (Outputs video signals with a
specified resolution regardless of compatibility with the TV.)
OUT 1 IN OUT 2
VOLUME MUTE
DRC ADAPTIVE
3
ZONE
2
SBL PL SBR SB PR
SW1 SL SW2 SW SR
PL C L R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PARTY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
N T S C
T V F O R M A T
OUT 1 IN OUT 2
VOLUME MUTE
DRC ADAPTIVE
3
ZONE
2
SBL PL SBR SB PR
SW1 SL SW2 SW SR
PL C L R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PARTY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
Y E S
M O N I T O R C H E C K
BACKUP Creates backup of the settings of the unit in the internal memory.
RECOVERY
Recovers the settings of the unit from the backup (available only when
backup has been created).
Note
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
OUT 1 IN OUT 2
VOLUME MUTE
DRC ADAPTIVE
3
ZONE
2
SBL PL SBR SB PR
SW1 SL SW2 SW SR
PL C L R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PARTY
ZONE
3
ZONE
4
HD
TAG
DOCK SPIMP.-
B A C K U P
R E C O V . / B A C K U P
OUT 1 IN OUT 2
VOLUME MUTE
DRC ADAPTIVE
3
ZONE
2
SBL PL SBR SB PR
SW1 SL SW2 SW SR
PL C L R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PARTY
ZONE
3
ZONE
4
HD
TAG
DOCK SPIMP.-
C A N C E L
I N I T I A L I Z E