Yamaha RX-V2065 - AV Network Receiver, Service Manual

Page: 23 / 163

23
RX-V2065/HTR-6295
RX-V2065/HTR-6295
3. When writing of the firmware is completed, “UPDATE SUCCESS” is displayed.
* When “UPDATE FAIL” is displayed before writing is completed, perform the operation procedures from step 1
to 2 again.
4. Press the “MAIN ZONE ON/OFF” key of this unit to turn off the power.
5. Remove the USB storage device from the USB terminal of this unit.
6. Start up the self-diagnostic function and select “25. ROM VER/SUM/PORT” menu.
Using the sub-menu, have the firmware version and checksum displayed, and then check that they are the same as
written ones.
* When the displayed firmware version and checksum are different from written ones, perform the “Writing the
Firmware” procedure all over again.
7. Press the “MAIN ZONE ON/OFF” key to turn off the power.