manualshive.com logo in svg

Yamaha RX-V1070, Owner'S Manual

The Yamaha RX-V1070 is a powerful and feature-packed audio-video receiver, providing exceptional audio quality and immersive cinematic experience. For easy setup and troubleshooting, the comprehensive Service Manual is available for free download from manualshive.com, ensuring you maximize the potential of this remarkable product.

Share
Download
background image

30

SPECIFICATIONS

AUDIO SECTION

Minimum RMS Output Power per Channel
Front L,R

8 ohms, 20 Hz to 20 kHz, 0.015% THD

<

RX-V1070

>

..................................110W+110W

<

RX-V870

>

........................................80W+80W

6 ohms, 20 Hz to 20 kHz, 0.015% THD

<

RX-V1070

>

..................................135W+135W

<

RX-V870

>

........................................95W+95W

Center

8 ohms, 20 Hz to 20 kHz, 0.015% THD

<

RX-V1070

>

.............................................110W

<

RX-V870

>

.................................................80W

6 ohms, 20 Hz to 20 kHz, 0.015% THD

<

RX-V1070

>

.............................................135W

<

RX-V870

>

.................................................95W

Rear L, R 

8 ohms, 1 kHz, 0.08% THD

<

RX-V1070

>

......................................30W+30W

<

RX-V870

>

........................................25W+25W

6 ohms, 1 kHz, 0.08% THD

<

RX-V1070

>

......................................40W+40W

<

RX-V870

>

........................................28W+28W

Dynamic Power per Channel
(by IHF Dynamic Headroom measuring method)

8/6 ohms

<

RX-V1070

>

...................................160W/190W

<

RX-V870

>

.....................................110W/140W

Dynamic Headroom

8/6 ohms

<

RX-V1070

>

.................................1.6 dB/2.0 dB

<

RX-V870

>

...................................1.4 dB/1.7 dB

Input Sensitivity/Impedance

PHONO MM ...............................2.5 mV/47 k-ohms
CD/TUNER/TAPE/LD·TV/VCR....150 mV/47 k-ohms
AUX 

<

RX-V1070 only

>

............150 mV/47 k-ohms

FRONT IN .........................................1V/47 k-ohms

Maximum Input Signal (1 kHz, 0.01% THD)

PHONO MM..................................................90 mV

Output Level/Impedance

REC OUT ...................................150 mV/470 ohms
FRONT OUT ....................................1V/3.3 k-ohms
LOW PASS ...................................0.8V/3.9 k-ohms

Maximum Voltage Output (1 kHz, 0.01% THD)

FRONT OUT ....................................................4.8V

Headphone Jack Rated Output/Impedance

8 ohms, 1 kHz, 0.01% THD 
Output Level.....................................................0.6V
Impedance...............................................390 ohms

Frequency Response (20 Hz to 20 kHz)

CD/TUNER/TAPE/LD·TV/VCR ...................0±1.5 dB
AUX 

<

RX-V1070 only

>

...........................0±1.5 dB

FRONT IN .................................................0±0.3 dB

RIAA Equalization Deviation

PHONO MM..............................................0±0.5 dB

Total Harmonic Distortion (20 Hz to 20 kHz)

PHONO MM to REC OUT (1V) .....................0.01%
CD/TUNER/TAPE/LD·TV/VCR to FRONT OUT (1V)

....................................................................0.008%

AUX to FRONT OUT (1V)  

<

RX-V1070 only

>

....................................................................0.008%

FRONT IN to SP OUT

<

RX-V1070

>

(50W/8 ohms) ......................................0.008%
(60W/6 ohms) ......................................0.008%

<

RX-V870

>

(40W/8 ohms) ......................................0.008%
(50W/6 ohms) ......................................0.008%

Signal-to-Noise Ratio (IHF-A Network)

PHONO MM (5 mV Input Shorted)

......................................................More than 86 dB

CD/TUNER/TAPE/LD·TV/VCR (Input Shorted)

......................................................More than 93 dB

AUX (Input Shorted)  

<

RX-V1070 only

>

......................................................More than 93 dB

Residual Noise (IHF-A Network).....................150 

µ

V

Channel Separation (Vol. –30 dB)

PHONO MM (Input Shorted 1 kHz/10 kHz)
.............................................................60 dB/45 dB
CD/TUNER/TAPE/LD·TV/VCR
(Input 5.1 k-ohms Terminated 1 kHz/10 kHz)
.............................................................60 dB/45 dB
AUX (Input 5.1 k-ohms Terminated 1 kHz/10 kHz)

<

RX-V1070 only

>

...........................60 dB/45 dB

Tone Control Characteristics

BASS: 

Boost/cut ........................±10 dB (50 Hz)
Turnover Frequency ...................350 Hz

TREBLE:

Boost/cut ..................±10 dB (20 kHz)
Turnover Frequency...............3.5 kHz

BASS EXTENSION..............................+7 dB (50 Hz)

Audio Muting ........................................................–

∞

VIDEO

Video Signal Type

[U.S.A. and Canada model] ........................NTSC
[Australia model] ............................................PAL
[General model] ..................................NTSC/PAL

Video Signal Level ............................1 Vp-p/75 ohms

S-Video Signal Level

Y..................................................1 Vp-p/75 ohms
C ..........................................0.286 Vp-p/75 ohms

Maximum Input Level ..................More than 1.5 Vp-p

Signal-to-Noise Ratio ........................................50 dB

Frequency Response ................5 Hz–10 MHz, –3 dB

FM SECTION

Tuning Range

[U.S.A. and Canada models]

................................................87.5 to 107.9 MHz

[Australia and General models]

............................................87.50 to 108.00 MHz

50 dB Quieting Sensitivity (IHF, 75 ohms)

Mono ..........................................1.55 

µ

V (15.1 dBf)

Stereo............................................21 

µ

V (37.7 dBf)

Usable Sensitivity (75 ohms)

(30 dB S/N Quieting, 1 kHz, 100% mod.)

....................................................0.8 

µ

V (9.3 dBf)

Image Response Ratio .....................................45 dB

IF Response Ratio ............................................80 dB

Spurious Response Ratio .................................70 dB

AM Suppression Ratio ......................................55 dB

Capture Ratio...................................................1.5 dB

Alternate Channel Selectivity ............................85 dB

Signal-to-Noise Ratio

(IHF) Mono/Stereo ..............................81 dB/76 dB

Harmonic Distortion 

Mono/Stereo (1 kHz) .................................0.1/0.2%

Stereo Separation (1 kHz) ................................50 dB

Frequency Response

20 Hz to 15 kHz .......................................0 ±1.5 dB

AM SECTION

Tuning Range

[U.S.A., Canada and General models]

..................................................530 to 1,710 kHz

[Australia and General models]

..................................................531 to 1,611 kHz

Usable Sensitivity .......................................100 

µ

V/m

Selectivity..........................................................32 dB

Signal-to-Noise Ratio ........................................50 dB

Image Response Ratio .....................................40 dB

Spurious Response Ratio .................................50 dB

Harmonic Distortion............................................0.3%

AUDIO SECTION
Output Level/Impedance

FM (100% mod., 1 kHz) .............700 mV/470 ohms
AM (30% mod., 400 Hz).............200 mV/470 ohms

GENERAL

Power Supply

[U.S.A. and Canada models]

....................................................AC 120V, 60 Hz

[Australia model] .........................AC 240V, 50 Hz
[General model]

..........................AC 110/120/220/240V, 50/60 Hz

Power Consumption

<

RX-V1070

>

[U.S.A., Australia and General models] ......400W
[Canada model] .............................750 VA, 600W

<

RX-V870

>

[U.S.A. model] .............................................300W
[Australia and General models]...................350W
[Canada model] .............................600 VA, 500W

AC Outlets

[U.S.A. and General models]
2 SWITCHED OUTLETS............100W max. total
1 UNSWITCHED OUTLET .........200W max. total
[Canada model]
2 SWITCHED OUTLETS............120W max. total
1 UNSWITCHED OUTLET .........180W max. total
[Australia model]
1 SWITCHED OUTLET ..............100W max. total

Dimensions (W x H x D)

.............................................435 x 171.5 x 468.5 mm

(17-1/8” x 6-3/4” x 18-7/16”)

Weight

<

RX-V1070

>

.....................18.6 kg (40 lbs. 15 oz.)

<

RX-V870

>

.........................14.8 kg (32 lbs. 9 oz.)

Accessories.....................................AM loop antenna

Indoor FM antenna

Remote control transmitter

Batteries

User program sheets

Specifications are subject to change without notice.

Summary of Contents for RX-V1070
































Reviews:

No comments

Related manuals for RX-V1070

Harman Kardon hk440 Vxi Technical Manual preview
hk440 Vxi
Brand: Harman Kardon Pages: 54
Harman Kardon AVR 1565 Quick Start Manual preview
AVR 1565
Brand: Harman Kardon Pages: 8
Harman Kardon AVR 3600 Worksheet preview
AVR 3600
Brand: Harman Kardon Pages: 5
MAC Audio edition BS30 Owner'S Manual preview
edition BS30
Brand: MAC Audio Pages: 12
u-blox EVK-M91 Quick Start preview
EVK-M91
Brand: u-blox Pages: 2
Yamaha RX-V750 Service Manual preview
RX-V750
Brand: Yamaha Pages: 128
Yamaha RX-V2400 Service Manual preview
RX-V2400
Brand: Yamaha Pages: 147
Yamaha RX-V581 User Manual preview
RX-V581
Brand: Yamaha Pages: 10
Pyle PLTS73FX Owner'S Manual preview
PLTS73FX
Brand: Pyle Pages: 39
Aiwa AV-S17 Service Manual preview
AV-S17
Brand: Aiwa Pages: 20
Megasat HD500se User Manual preview
HD500se
Brand: Megasat Pages: 32
OEM TY-6300SD Operation Manual preview
TY-6300SD
Brand: OEM Pages: 58
Strong SRT 4650 User Manual preview
SRT 4650
Brand: Strong Pages: 20
Sound Storm SD800TS User Manual preview
SD800TS
Brand: Sound Storm Pages: 12
Conrad Jaxster 3D HD Manual preview
Jaxster 3D HD
Brand: Conrad Pages: 32
Newport zW Series Quick Start Manual preview
zW Series
Brand: Newport Pages: 16
Napoleon PVA81 Installation Instructions Manual preview
PVA81
Brand: Napoleon Pages: 8
Hammarlund HQ-180A Series Technical Description, Test And Operating Instructions preview
HQ-180A Series
Brand: Hammarlund Pages: 73

Brands by name

Popular brands

Load more brands