21
Follow step 1–6 shown in “OPERATIONS” on page 15.
Select the desired program that is suitable for the
source.
The corresponding indicator will illuminate.
If desired, adjust the delay time and the output level of
each speaker. (For details, refer to the corresponding
descriptions on page 22–23.)
Notes
●
If you prefer to cancel the selected program, press the
ON/OFF switch. The sound will be the normal 2-channel
stereo without surround sound effect.
●
In the ROCK CONCERT, JAZZ CLUB, CHURCH and
CONCERT HALL modes, no sound is heard from the center
speaker.
●
When a monaural sound source is played in the DOLBY
PRO LOGIC or ENHANCED mode, no sound is heard from
the front speakers and the rear speakers. Sound is heard
only from the center speaker. However, if the center mode
is in the PHANTOM, the front speakers output the sound of
the center speaker.
●
If you connect an external amplifier to this unit, see if it has
built-in surround sound or ambience circuitry. If it does,
then be sure that the surround or ambience circuitry on that
amplifier is off while you are using the digital sound field
processor’s Dolby Pro Logic Surround decoding function.
●
When this unit is in the Dolby Pro Logic Surround mode, if
the main-source sound is considerably altered by
overadjustment of the BASS, TREBLE controls or BASS
EXTENSION switch, the relationship between the center
and rear channels may produce an unnatural effect.
1
2
3
To play a source with the digital sound field processor
Illustrations: RX-V1070
Parts in shaded areas ( )
are not present on RX-V870.
2
3
PRO LOGIC
