SOUND FIELD PARAMETER DESCRIPTIONS
71
ADDITIONA
L
INF
O
RMA
T
IO
N
Eng
lish
You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your
listening room. Not all of the following parameters are found in every program.
■
DSP LEVEL (DSP level)
Function:
Adjusts the level of all the DSP effect sounds within a narrow range.
Description:
Depending on the acoustics of your listening room, you may want to increase or decrease the DSP
effect level relative to the level of the direct sound.
Control range:
–6 dB to +3 dB
■
INIT. DLY (Initial Delay)
Function:
Changes the apparent distance from the source sound by adjusting the delay between the direct sound
and the first reflection heard by the listener.
Description:
The smaller the value, the closer the sound source seems to the reflection face. The larger the value, the
farther it seems. For a small room, set to a small value. For a large room, set to a large value.
Control range:
1
to
99 msec
For 2ch Stereo:
■
DIRECT (Direct)
Function:
Bypasses this unit’s decoders and DSP processors for pure high fidelity sound when playing 2-channel
analog sources. The AUTO setting is effective when BASS and TREBLE are set to 0 dB while the night
listening mode is set to OFF.
Choices:
AUTO
, OFF
• When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2 channels and output from the front left and
right speakers.
• When “BASS OUT” is set to BOTH, or “FRONT” set to SMALL and “BASS OUT” set to SWFR, front left and right speaker low-
frequency signals are redirected to the subwoofer.
SOUND FIELD PARAMETER DESCRIPTIONS
Notes
Source Sound
Early
Reflections
Time
Time
Time
Delay
Delay
Delay
Sound Source
Reflection Face
Le
ve
l
Small value = 1 ms
Large value = 99 ms
Lev
el
Le
ve
l
Summary of Contents for RX-V100D
Page 87: ......
