Yamaha RX-S600 Owner'S Manual Download Page 18

Page: 18 / 123

PREPARATIONS

➤

Input/output jacks and cables

■

Video/audio jacks

❑

HDMI jacks

Transmit digital video and digital sound through a single
jack. Use an HDMI cable.

• Use a 19-pin HDMI cable with the HDMI logo. We recommend using

a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation.

• The unit’s HDMI jacks support the HDMI Control, Audio Return

Channel (ARC), and 3D and 4K Ultra HD video transmission
(through output) features.

• Use high speed HDMI cables to enjoy 3D or 4K Ultra HD videos.

❑

HDMI/MHL jack

Transmit digital video and digital sound. Use an MHL
cable.

• The HDMI 5/MHL jack of the unit supports both HDMI and MHL

connections. Use a cable that matches the jack on your
MHL-compatible mobile device. When connecting an
HDMI-compatible playback device to the jack, use an HDMI cable.
For details on an MHL connection, see “MHL connection” (p.24).

■

Video jacks

❑

COMPONENT VIDEO jacks

Transmit video signals separated into three
components: luminance (Y), chrominance blue (P

and chrominance red (P

). Use a component video

cable with three plugs.

❑

VIDEO jacks

Transmit analog video signals. Use a video pin cable.

■

Audio jacks

❑

OPTICAL jacks

Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.

❑

COAXIAL jacks

Transmit digital audio signals. Use a digital coaxial
cable.

❑

AUDIO jacks

(Stereo L/R jacks)

Transmit analog stereo audio signals. Use a stereo pin
cable (RCA cable).

(Stereo mini jack)

Transmits analog stereo audio signals. Use a stereo
mini-plug cable.

Input/output jacks and cables

HDMI cable

HDMI 5

MHL

MHL cable

Component video cable

Video pin cable

AV 1

OPTICAL

Digital optical cable

AV 1

Digital coaxial cable

AUDIO 2

Stereo pin cable

AUDIO

Stereo mini-plug cable

RX-S600_S600D_om.book Page 18 Tuesday, May 28, 2013 1:36 PM

Summary of Contents for RX-S600




























































































































Search results

Summary of Contents for RX-S600

Reviews:

Related manuals for RX-S600

Brands by name

Popular brands

Yamaha RX-S600, Owner'S Manual

Search results

Summary of Contents for RX-S600

Reviews:

Related manuals for RX-S600

Brands by name

Popular brands