SETUP
136
This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reproduce separate input sources in the main zone and the second zone (Zone2). You can
control this unit from the second zone using the supplied remote control.
Connecting Zone2
You need the following additional equipment to use the multi-zone functions of this unit:
•
An infrared signal receiver in the second zone.
•
An infrared signal emitter in the main zone. This emitter transmits infrared signals from the remote control
to a CD player or a DVD player, etc. in the main zone via the infrared signal receiver in the second zone.
•
An amplifier and speakers in the second zone.
•
A TV in the second zone.
■
When using the external amplifier
An amplifier located in the second zone can be connected to this unit as shown below.
■
When using the internal amplifier of this unit
Connect the speakers in the second zone to the EXTRA SP jacks directly (
Enjoying the contents in another room
Only analog signal can be sent to Zone2. If you want to output sound from Zone2, connect an
external component to AV1-4, AUDIO1-4 or V-AUX by analog connection. For example, if you
want to output sound from an HDMI DVD player in Zone2, you must connect the component to this
unit by both HDMI and analog connections.
Since there are many possible ways to connect and use this unit in a multi-zone configuration, we
recommend that you consult with your nearest authorized Yamaha dealer or service center about the
Zone2 connections that best meet your requirements.
To the REMOTE IN jack
Infrared signal
emitter
DVD player (etc.)
Amplifier
Remote control
Second zone
(Zone2)
This unit
From the ZONE2 OUT jacks
Infrared signal
receiver
From the REMOTE OUT jack
Main zone
To avoid unexpected noise, DO NOT USE the Zone2 feature with CDs encoded in DTS.
ZONE OUT
ZONE 2
AC IN
UND
SURROUND BACK/
SPEAKERS
CENTER
AV 3
AV 4
HDMI
AV 5
AV 6
AV 7
SINGLE
FRONT
BI-AMP
BWOOFER
ENTER
MONITOR OUT/ZONE OUT
PRE OUT
Y
P
B
P
R
P
B
P
R
C
D
SURROUND
SUR. BACK
CENTER
SUBWOOFER
1
1
2
RS-232C
2
1
TRIGGER
OUT
+12V 0.1A MAX.
FRONT
(SINGLE)
ZONE2/ZONE3/
F.PRESENCE
EXTRA SP
IN
OUT
REMOTE
AUDIO
R
L
R
L
Power amplifier
Second Zone
(Zone2)
Audio input