Control functions
41
RST90
RST90TF / RST90TFL / RST90TFY
3.
Tighten the locknut while holding the ad-
justing nut in place.
NOTICE:
Always
tighten the locknut against the adjust-
ing nut, and then tighten the locknut to
the specified torque.
[ECS00861]
ESU13114
Adjusting the spring preload of the
sliding frame extension (RST90TF /
RST90TFL / RST90TFY)
WARNING
EWS00751
The left and right spring preloads must be
adjusted to the same setting. Uneven set-
tings can cause poor handling and loss of
stability.
The spring preload of the sliding frame exten-
sion can be adjusted by turning the adjusting
nuts.
To increase the spring preload, turn the ad-
justing nut in direction (a). To decrease the
spring preload, turn the adjusting nut in direc-
tion (b).
TIP
The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The longer distance A is, the higher the
spring preload; the shorter distance A is, the
lower the spring preload.
1. Locknut
2. Control rod adjusting nut
3. Standard position
4. Adjustable range
5. Red paint area
1. Locknut
2. Control rod adjusting nut
3. Standard position
4. Adjustable range
5. Red paint area
Locknut tightening torque:
25 Nm (2.5 m·kgf, 18 ft·lbf)
1
5
2
3
4
1
5
2
3
4
1. Spring preload adjusting nut
2. Distance A
(a)
(b)
1
2
U8JV70E0.book Page 41 Monday, April 6, 2015 11:49 AM
