![background image](http://html.mh-extra.com/html/yamaha/rs7000-ver-1-2/rs7000-ver-1-2_owners-manual_899785269.webp)
2. MIDI Events Handled by the RS7000
RS7000
269
7
Other Inf
ormation
5. Channel Aftertouch (CAT)
• This event is generated when pressure is applied to a key after
the note is played.
• The data represents the amount of pressure applied to the key.
The bar graph to the right is a graphic representation of the
value.
[Settings]
Data
000 ~ 127
6. Polyphonic Aftertouch (PAT)
• This event is generated when pressure is applied to a key after
the note is played. Unlike the Channel Aftertouch event, how-
ever, individual data is provided for each key.
• Note Name specifies the key.
• The data represents the amount of pressure applied to the key.
The bar graph to the right is a graphic representation of the
value.
[Settings]
Note Name
C-2 ~ G8
Data
000 ~ 127
7. Registered Parameter Number (RPN)
• Changes parameter values for each tone generator part.
• Normally three types of control change data are sent: RPN
MSB (101), RPN LSB (100), and Data Entry MSB (6). In the
RS7000, Data Entry LSB (38) is added to this and the resulting
group of control change events is handled as one.
• Once an RPN is specified, the following data entry message
received on the same channel is processed as the value of that
RPN. Prevent operational errors by transmitting an Null mes-
sage (7FH, 7FH) after using these messages to perform a con-
trol operation.
• The RS7000 tone generator section allows control of the 4 fol-
lowing parameters.
[Settings]
RPN MSB
000 ~ 127
RPN LSB
000 ~ 127
Data Entry MSB
000 ~ 127
Data Entry LSB
000 ~ 127
●
Parameter List (RPN)
Data
Note Name
Data
RPN MSB-LSB
Data Entry
MSB-LSB
MSB
LSB
Display
Parameter Name
Data Range
Initial
Value
Function
MSB
LSB
000
000
PBSens
Pitch Bend Sensitivity
000~024
–
024
Specifies the amount of pitch bend produced in
response to pitch bend data in semitone increments.
000
001
FnTune
Fine Tune
-64~+63
–
+00
Adjusts the tuning in cent increments.
000
002
CsTune
Coarse Tune
-24~+24
–
+00
Adjusts the tuning in semitone increments.
127
127
Null
Null
–
–
–
Voids the RPN and NRPN settings so no tone gener-
ator settings are changed when the following Data
Entry message is received.
Summary of Contents for RS7000 Ver.1.2
