background image

E-

30

APPENDIX

Problem

Crackling noise from time to time.

Noise increases during receiving
a stereo broadcast, or the
reception mode changes from
stereo to monaural unexpectedly.

A desired station cannot be
received by the auto tuning
method.

Stereo broadcasts are noisy and
the ST indicator flashes.

There is distortion and clear
reception cannot be obtained
even by using a good quality FM
antenna.

Preset stations cannot be
selected.

Cause

Interference from the starting motor of a
nearby car.

Interference from the thermostats of a nearby
electric appliance.

Because of the characteristics of FM
broadcasts, this is limited to cases where the
transmitter is far away or the antenna input is
poor.

Because of the characteristics of FM
broadcasts, this is limited to cases where the
transmitter is far away or the antenna input is
poor.

Insufficient antenna input.

Not tuned correctly.

There is multipath interference.

Preset memory has been erased.

What to Do

Position the FM antenna as high and as far
away from nearby roads as possible.

Use a coaxial cable for connecting the antenna.

Install a noise canceller on such an appliance.

Check the antenna connections.

Install a multi-element type FM antenna if
possible.

Tune in to the station manually.

Install an antenna suitable for the electric field
strength of your area.

Make tuning again.

Change the position of the antenna.

Store stations again.

When using the built-in FM tuner

Depending on some computer hardware or operating systems, all functions of this unit cannot be used.You can refer to
the following Yamaha website for details and related information.

http://www.yamaha.co.jp/audio/

Memory back-up

The memory back-up circuit prevents the setting of the input selector, the sound field program, the preset memory of
the tuner from being lost even if the AC power cord is disconnected from the AC outlet or the power is cut due to
temporary power failure. If, however, the power is cut for more than one week, the memory may be erased. In that
case, you must make necessary settings, and store FM stations in memory again.

Summary of Contents for RP-U200


































Reviews: