Yamaha Road Star XV17AWX, Owner'S Manual

Page: 33 / 110

INSTRUMENT AND CONTROL FUNCTIONS
3-13
3
To change the windshield height
1. Remove the bolts on each side of
the windshield.
2. Move the windshield to the other
position.
3. Install the bolts and tighten them to
the specified torque.
4. Loosen the screws holding the
windshield cover located above
the headlight, position the cover
close to the headlight without
touching it, and then tighten the
screws.
WARNING
EWA10920
After adjusting the windshield:
● Securely tighten the windshield
bolts.
● Turn the handlebar to the left
and right to make sure that the
handlebar is not obstructed and
that the windshield does not
contact any other parts.
● Open the throttle and make sure
that the throttle grip returns
properly when released, other-
wise an accident or injury could
result.
EAU14613
Saddlebags [XV17ATX(C)]
WARNING
EWA11111
Improper loading or overloading can
cause loss of control and possibly
an accident or personal injury. See
pages 1-5 and 6-18 for important
loading and tire pressure informa-
tion.
●
Always securely close each
saddlebag before riding.
●
Distribute weight evenly on
each side of the motorcycle.
●
Do not exceed the load limit of 5
kg (11 lb) for each saddlebag.
●
Do not exceed the maximum
load of 177 kg (390 lb) for the ve-
hicle.
●
Do not exceed 120 km/h (80
mi/h) when riding with luggage
in the sidecases, otherwise han-
dling could be affected. Improp-
er loading, poor tire or overall
motorcycle conditions, poor
road surfaces or adverse weath-
er conditions may make it nec-
essary to further reduce the
riding speed.
Tightening torque:
Windshield bolt:
16 Nm (1.6 m·kgf, 11 ft·lbf)
1. Windshield cover
2. Screw
U5VN14E0.book Page 13 Tuesday, January 22, 2008 1:34 PM