Yamaha Road Stan XV17AT, Owner'S Manual

Page: 35 / 105

INSTRUMENT AND CONTROL FUNCTIONS
3-15
3
3. Tighten the locknut to the specified
torque.
CAUTION:
ECA10120
Always tighten the locknut against
the adjusting nut, and then tighten
the locknut to the specified torque.
WARNING
EWA10220
This shock absorber contains highly
pressurized nitrogen gas. For prop-
er handling, read and understand
the following information before
handling the shock absorber. The
manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.
● Do not tamper with or attempt to
open the gas cylinder.
● Do not subject the shock ab-
sorber to an open flame or other
high heat sources, otherwise it
may explode due to excessive
gas pressure.
●
Do not deform or damage the
gas cylinder in any way, as this
will result in poor damping per-
formance.
● Always have a Yamaha dealer
service the shock absorber.
1. Distance A
Spring preload:
Minimum (soft):
Distance A = 42.5 mm (1.67 in)
Standard:
XV17A(C)/XV17AW(C)/
XV17AM(C)
Distance A = 42.5 mm (1.67 in)
XV17AT(C)/XV17ATM(C)
Distance A = 45.5 mm (1.79 in)
Maximum (hard):
Distance A = 51.5 mm (2.02 in)
Tightening torque:
Locknut:
35 Nm (3.5 m·kgf, 25 ft·lbf)
U5VN11E0.book Page 15 Tuesday, April 13, 2004 5:24 PM