Yamaha RMAX WOLVERINE 2021 Owner'S Manual Download

Page: 45 / 192

5-14

NOTICE

ECB00812

If the multi-function display indicates an
error code, the vehicle should be checked
as soon as possible in order to avoid en-
gine damage.

EBU37661

Speed Management System (if
equipped)

This model is equipped with a Speed Man-
agement System. When the Speed Manage-
ment System switch is set to the “

”

position, the vehicle’s top speed is limited to
approximately 40 km/h (25 mph).

WARNING!

This system works via the electronic throt-
tle valve and cannot slow the vehicle. Use
the brakes to slow the vehicle.

[EWB04200]

1. System key (gray)

1. Speed Management System switch (if equipped)

UB4M13E0.book Page 14 Thursday, June 24, 2021 2:40 PM

Summary of Contents for RMAX WOLVERINE 2021

































































































































































































Search results

Summary of Contents for RMAX WOLVERINE 2021

Reviews:

Related manuals for RMAX WOLVERINE 2021

Brands by name

Popular brands

Yamaha RMAX WOLVERINE 2021, Owner'S Manual

Search results

Summary of Contents for RMAX WOLVERINE 2021

Reviews:

Related manuals for RMAX WOLVERINE 2021

Brands by name

Popular brands