Yamaha Rhino 700 Fi Owner'S Manual Download Page 34

Page: 34 / 190

4-3

EVU00170

Neutral indicator light “N”

This indicator light comes on when the drive
select lever is in the “N” position.

5B410001

Reverse indicator light “R”

This indicator light comes on when the drive
select lever is in the “R” position.

EVU00210

Parking brake indicator light “P”

This indicator light comes on when the park-
ing brake is applied.

EBU29621

On-Command four-wheel-drive indicator
“

”, On-Command differential gear lock

indicator “

” and indicator light “DIFF.

LOCK”

The On-Command four-wheel-drive indicator
“

” comes on when the On-Command four-

wheel-drive switch is set to the “4WD” posi-
tion.

The On-Command differential gear lock indi-
cator “

” and the On-Command differential

gear lock indicator light “DIFF. LOCK” come
on when the On-Command differential gear
lock switch is set to the “LOCK” position.

DIFF.

LOCK

DIFF.

LOCK

1RB71_EE.book Page 3 Friday, April 20, 2012 8:38 AM

Summary of Contents for Rhino 700 Fi































































































































































































Search results

Summary of Contents for Rhino 700 Fi

Reviews:

Related manuals for Rhino 700 Fi

Brands by name

Popular brands

Yamaha Rhino 700 Fi, Owner'S Manual

Search results

Summary of Contents for Rhino 700 Fi

Reviews:

Related manuals for Rhino 700 Fi

Brands by name

Popular brands