Yamaha Rhino 700 Fi, Owner'S Manual

Page: 129 / 190

8-15
NOTICE
●
In order to prevent clutch slippage
(since the engine oil also lubricates
the clutch), do not mix any chemical
additives with oil. Do not use oils with
a diesel specification of “CD” or oils
of a higher quality than specified. In
addition, do not use oils labeled “EN-
ERGY CONSERVING II” or higher.
● Make sure that no foreign material en-
ters the crankcase.
13. Start the engine, and then let it idle for
several minutes while checking it for oil
leakage. If oil is leaking, immediately turn
the engine off and check for the cause.
14. Turn the engine off, wait at least 10 min-
utes, and then check the oil level and cor-
rect it if necessary.
15. Install the console.
5B410013
Final gear oil
Checking the final gear oil level
1. Park the vehicle on a level surface.
2. Remove the final gear oil filler bolt and its
O-ring, and then check the oil level in the
final gear case. The oil level should be at
the brim of the filler hole.
1. Final gear oil filler bolt 2. O-ring
3. Final gear oil 4. Correct oil level
1 2
3
4
1RB71_EE.book Page 15 Friday, April 20, 2012 8:38 AM