8
Getting started
6 Tap Next to start sending appropriate commands
for the selected device.
7 Tap OK when the device reacts.
Notes · Even when the device is responding to the current code set, it is still advisable to try out other
code sets. When your device responds to more than one code set, install the most suitable
one.
· The name of the responding code set is displayed when you tap the OK button, so you know
which code set to select from the list after you try out other code sets.
The Remote Control switches to Try mode. The first control
panel of selected device is displayed.
8 Try out the buttons on the different control panels and
check whether the device is responding to the RC codes
the Remote Control is sending.
9 If you are not satisfied with the way the device is
responding, tap Back to to continue the automatic search.
-or-
If you are satisfied with the selected code set, tap Install.
When the RC codes for your device are installed, the Remote Control beeps and returns
to Use mode. Your brand is now defined for the selected device.
10 Define other devices you want to operate.
Summary of Contents for RAV-2000
Page 1: ...R ...
