Yamaha Raptor YFM350S, Service Manual

Page: 16 / 69

– 8 –
SPEC
MAINTENANCE SPECIFICATIONS
Tightening torques
Brake lever and brake pedal
Brake lever free play 0 mm (0 in)
Brake pedal position 50.2 mm (1.98 in)
From the top of the frame to the top of the brake
pedal
Throttle lever free play 2 ~ 4 mm (0.08 ~ 0.16 in)
Drive chain
Type/manufacturer DID520V/DAIDO
Number of links 97 + 1 links
Chain free play 25.0 ~ 35.0 mm (0.98 ~ 1.38 in)
Part to be tightened Thread size
Tightening torque
Remarks
Nm m · kg ft · lb
Engine and frame M10 73 7.3 53
Front shock absorber and frame M10 48 4.8 35
Front shock absorber and lower arm M10 48 4.8 35
Steering knuckle and front wheel hub M14 70 7.0 50
Steering shaft and frame M10 35 3.5 25
Tie-rod locknut M10 15 1.5 11
Disc cover (inner) M6 7 0.7 5.1
Front brake master cylinder M6 7 0.7 5.1
Clutch and parking brake lever assembly M5 4 0.4 2.9
Front brake hose and upper front arm M6 7 0.7 5.1
Front brake pipe and brake pipe joint M10 19 1.9 13
Brake pipe joint and frame M6 10 1.0 7.2
Brake caliper bleed screw M8 6 0.6 4.3
Rear brake hose union bolt M10 28 2.8 20
Parking brake adjusting bolt and locknut M8 16 1.6 11
Rear brake light switch bracket and frame M6 7 0.7 5.1
Rear brake master cylinder and frame M8 23 2.3 17
Rear brake fluid reservoir and frame M6 7 0.7 5.1
Rear brake hose and swingarm M6 7 0.7 5.1
Rear hub and rear brake caliper M8 34 3.4 24
Rear axle ring nut M33 160 16.0 115
LT
Rear axle ring nut set bolt M6 7 0.7 5.1
LT
Rear hub and swingarm (lower) M10 73 7.3 53
Rear shock absorber and frame M12 80 8.0 58
Relay arm and swingarm M12 73 7.3 53
Rear shock absorber and relay arm M12 73 7.3 53
Connecting rod and relay arm M12 73 7.3 53
Connecting rod and frame M12 73 7.3 53
Spring preload adjusting locknut (rear shock
absorber)
M44 42 4.2 30
Model YFM350S