manualshive.com logo in svg

Yamaha Raptor 660, Owner'S Manual, Page: 73 / 185

Share
Download
Yamaha Raptor 660 Owner'S Manual Download Page 73

7-3

WARNING

_ 

Indicates a potential hazard that could
result in serious injury or death.

GETTING TO KNOW YOUR ATV 

This ATV is intended for recreational use by
experienced operators only. Even though you
are an experienced operator of all other all ter-
rain vehicles or motorcycles, riding the ATV
requires special skills acquired through prac-
tice. Take your time to fully learn techniques
before attempting more difficult maneuvers.

Riding your new ATV can be a very enjoyable
activity, providing you with hours of pleasure.
But it is essential to familiarize yourself with
the operation of the ATV to achieve the skill
necessary to enjoy riding safely. Before you
begin to ride, be sure you have read this Own-
er’s Manual completely and understand the
operation of the controls. Pay particular atten-

tion to the safety information on pages 2-1–
2-7. Please also read all caution and warning
labels on your ATV.

U5LP13.book  Page 3  Wednesday, March 5, 2003  4:16 PM

Summary of Contents for Raptor 660


























































































































































































Reviews:

No comments