Yamaha Raptor 660, Owner'S Manual

Page: 59 / 185

6-5
EBU12092
Reverse knob operation and reverse
driving
CAUTION:
_
Before shifting, stop the machine and re-
turn the throttle lever to its closed posi-
tion, otherwise the transmission may be
damaged.
_
1. Bring the machine to a complete stop, re-
turn the throttle lever to the closed posi-
tion, apply the clutch lever, and shift the
transmission into first gear.
2. While applying the brake pedal, turn the
reverse knob clockwise with your right
hand.
3. Apply the clutch lever and shift the trans-
mission into reverse by pressing down on
the shift pedal.
1. Reverse knob “REV” 2. Shift pedal
NOTE:
_
When in reverse, the reverse indicator light
should be on. If the light does not come on,
ask a Yamaha dealer to inspect the machine.
_
4. Check behind you for people or obsta-
cles, and then release the brake pedal.
5. Open the throttle lever gradually, and at
the same time, release the clutch lever
slowly, and continue to watch to the rear
while backing.
U5LP13.book Page 5 Wednesday, March 5, 2003 4:16 PM