background image

Instrument an

d

 control functions

4-17

4

TIP

The ABS performs a self-diagnos-
tic test each time the vehicle first
starts off after the key is turned to
“ON” and the vehicle has traveled
at a speed of 10 km/h (6 mi/h) or
higher. During this test, a “click-
ing” noise can be heard from the
hydraulic control unit, and if the
brake lever or brake pedal is even
slightly applied, a vibration can be
felt at the lever and pedal, but
these do not indicate a malfunc-
tion.

This ABS has a test mode which
allows the owner to experience
the pulsation at the brake lever or
brake pedal when the ABS is op-
erating. However, special tools are
required, so please consult your
Yamaha dealer.

NOTICE

ECA20100

Be careful not to 

d

ama

g

e the wheel

sensor or wheel sensor rotor; other-
wise, improper performance of the
ABS will result.

EAU13077

Fuel tank cap

To open the fuel tank cap

Open the fuel tank cap lock cover, in-
sert the key, and then turn it 1/4 turn
clockwise. The lock will be released
and the fuel tank cap can be opened.

To close the fuel tank cap

With the key still inserted, push down
the fuel tank cap. Turn the key 1/4 turn
counterclockwise, remove it, and then
close the lock cover.

1. Front wheel sensor rotor
2. Front wheel sensor

1. Rear wheel sensor
2. Rear wheel sensor rotor

1

2

1

2

1. Fuel tank cap lock cover
2. Unlock.

1

2

UBN6EAE0.book  Page 17  Friday, November 12, 2021  10:40 AM

Summary of Contents for R6 YZF600W













































































































Reviews: