Instrument an
d
control functions
4-8
4
Re
d
zone: 16500 r/min an
d
a
b
ove
Clock an
d
lap timer
The clock uses a 12-hour time system.
To set the clock
1. Turn the key to “ON”.
2. Push the “SELECT” button and
the “RESET” button for two sec-
onds. The hour digits will start
flashing.
3. Push the “RESET” button to set
the hours.
4. Push the “SELECT” button, and
the minute digits will start flashing.
5. Push the “RESET” button to set
the minutes.
6. Push the “SELECT” button to con-
firm the settings and start the
clock.
To switch between the clock and lap
timer
Push and release the “SELECT” button
and the “RESET” button at the same
time.
The lap timer records and stores up to
20 lap times. The lap time history re-
cords are divided into two groups, “L”
for lap order and “F” for fastest order.
For lap order, the most recent lap is
designated L1 (and L19 will become
L20). In the case of fast lap history, any
new fast lap within the top 20 will be in-
serted and the previous F20 will be
pushed out of the history.
To use the lap timer
1. Push the “RESET” button for one
second to set the lap timer to the
counting-ready state (the colon “:”
and period “.” will flash).
2. Push the pass switch “
” to start
the lap timer.
3. Push the pass switch “
” to
mark the start of each new lap.
4. Push the “SELECT” button to stop
the lap timer.
5. Push the “SELECT” button again
to reset the lap timer (or push the
“RESET” button for one second to
reset the lap timer and set it to the
counting-ready state).
To view the lap time history
1. Push the “SELECT” button for one
second. Lap order history is se-
lected (indicated by “L-20” in the
lower part of the display), or push
the “SELECT” button again to se-
lect fast lap history (indicated by
“F-20”).
1. Clock
1
1. Lap timer
1
UBN6EAE0.book Page 8 Friday, November 12, 2021 10:40 AM
