Perio
d
ic maintenance an
d
a
d
justment
7-17
7
TIP
An oil filter wrench is available at a
Yamaha dealer.
9. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
TIP
Make sure that the O-ring is properly
seated.
10. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
11. Install the fuel tank overflow hose
into the guides, then place them in
their original position.
12. Install the shift arm by aligning the
slot in the shift arm with the mark
on the shift shaft and installing the
shift arm bolt, then tightening it to
the specified torque.
NOTICE:
Be
sure to ali
g
n the slot an
d
mark
to ensure proper shiftin
g
. If the
slot an
d
mark are not ali
g
ne
d
,
the shift arm will not move cor-
rectly an
d
you may not
b
e a
b
le
to shift up or
d
own.
[ECA24140]
13. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
14. Refill with the specified amount of
the recommended engine oil.
1. O-ring
1. Torque wrench
Ti
g
htenin
g
torque:
Oil filter cartridge:
17 N·m (1.7 kgf·m, 13 lb·ft)
1
1. Shift arm
2. Shift arm bolt
3. Slot
4. Shift shaft
5. Mark
Ti
g
htenin
g
torque:
Shift arm bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
Ti
g
htenin
g
torque:
Engine oil drain bolt:
43 N·m (4.3 kgf·m, 32 lb·ft)
2
1
3
4
5
UBN6E2E0.book Page 17 Friday, December 7, 2018 2:56 PM
