FEATURES
1-8
ET2C01020
INSTRUMENT FUNCTIONS
Multi-function meter unit
WARNING
EWA13S1006
Be sure to stop the vehicle before making
any setting changes to the multi-function
meter unit.
The multi-function meter unit is equipped with
the following:
• a speedometer (which shows the riding
speed)
• a tachometer (which shows engine speed)
• an odometer (which shows the total distance
traveled)
• two tripmeters (which show the distance trav-
eled since they were last set to zero)
• a fuel reserve tripmeter (which shows the
distance traveled since the fuel level warning
light came on)
• a stopwatch
• a clock
• a coolant temperature display
• an air intake temperature display
• a self-diagnosis device
• a display brightness and shift timing indicator
light control mode
NOTE:
• Be sure to turn the key to “ON” before using
the “SELECT” and “RESET” buttons, except
for setting the display brightness and shift
timing indicator light control mode.
• To switch the speedometer and odometer/
tripmeter displays between kilometers and
miles, press the “SELECT” button for at least
one second.
Tachometer
The electric tachometer allows the rider to
monitor the engine speed and keep it within
the ideal power range.
When the key is turned to “ON”, the tachome-
ter needle will sweep once across the r/min
range and then return to zero r/min in order to
test the electrical circuit.
CAUTION:
ECA13S1001
Do not operate the engine in the tachome-
ter red zone.
Red zone: 16500 r/min and above
Clock
To set the clock:
1. Turn the key to “ON”.
2. Push the “SELECT” button and “RESET”
button together for at least two seconds.
3. When the hour digits start flashing, push
the “RESET” button to set the hours.
4. Push the “SELECT” button, and the minute
digits will start flashing.
1. Clock
2. Speedometer
3. “SELECT” button
4. “RESET” button
5. Tachometer
6. Coolant temperature display/air intake tem-
perature display
7. Odometer/tripmeters/fuel reserve tripmeter/
stopwatch
8. Shift timing indicator light
1. Tachometer
2. Tachometer red zone
1. Clock
