26
If desired, you can adjust the sound output level of the center
speaker even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on page 17.
Note
This adjustment is useful only when the digital sound field
program
PRO LOGIC or
3 STEREO is selected.
If desired, you can adjust the sound output level of the rear
speakers even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on page 17.
Note
This adjustment is useful only when the digital sound field
program
PRO LOGIC, ROCK or HALL is selected.
You can adjust the time difference between the beginning of
the sound from the main speakers and the beginning of the
effect sound from the rear speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs (except
3
STEREO) individually.
Control range
: 15, 20, 25, 30 milliseconds
Preset value
PRO LOGIC: 25 milliseconds
HALL:
20 milliseconds
ROCK:
15 milliseconds
This adjustment can be made only by using the remote control
transmitter.
Notes
●
When
3 STEREO is selected, this adjustment cannot
be made.
●
Adding too much delay will cause an unnatural effect with
some sources.
●
The value of the delay time you last set will remain
memorized even when this unit is in the standby mode.
However, if the power cord is kept disconnected for more
than one week, these values will be automatically changed
back to the original factory settings.
●
When the DELAY TIME key is pressed, the sound may be
momentarily interrupted.
Adjustment of the CENTER LEVEL
Adjustment of the REAR LEVEL
CENTER
LEVEL
0
l0
REAR
LEVEL
0
l0
Adjustment of DELAY TIME
+
— DELAY TIME
Adjustable
FM
20
ms
NORM WIDE
