CONTROLS AND FUNCTIONS
7
En
IN
TRO
D
U
C
TI
O
N
CONTROLS AND FUNCTIONS
Engli
s
h
Rear panel
(R-S700)
1
GND terminal
Used to connect a turntable (see page 10).
2
TAPE jacks
Used to connect a tape deck (see page 10).
3
Antenna terminals
Used to connect FM and AM antennas (see page 12).
4
DOCK jack
Used to connect an optional Yamaha Universal Dock for
iPod (such as the YDS-12), Wireless System for iPod
(YID-W10), or Bluetooth Wireless Audio Receiver
(YBA-10) (see page 24).
5
VOLTAGE SELECTOR switch
(Central/South America models only)
The VOLTAGE SELECTOR switch must be set to your
local main voltage before plugging the power cable into
the wall outlet (see page 13).
6
PHONO jacks
Used to connect a turntable (see page 10).
7
CD jacks
Used to connect a CD player (see page 10).
8
LINE 1-3 jacks
Used to connect audio components (see page 10).
9
iPod VIDEO output jack (R-S700 only)
Used to send iPhone/iPod video content to a video
monitor, such as a TV (see page 24).
Video content output is possible only when an iPhone/iPod is
connected this unit using a Universal Dock for iPod (such as the
YDS-12).
0
COUPLER jacks (R-S700 only)
Used to connect an external unit (see page 13).
A
SUBWOOFER OUT jack
Used to connect a subwoofer with built-in amplifier (see
page 10).
y
The SUBWOOFER OUT jack attenuates signals over 90 Hz.
B
POWER MANAGEMENT switch
Used to enable or disable the automatic power down
function. When this function is enabled, this unit
automatically enters standby mode if it is not operated for
a certain amount of time (3 settings are available; see page
31).
C
SPEAKERS terminals
Used to connect speakers (see page 10).
D
IMPEDANCE SELECTOR switch
Used to select the impedance setting (see page 11).
E
AC IN (R-S700 only)
Used to plug in the supplied power cable (see page 13).
Note
