CONTROLS AND FUNCTIONS
8
En
This section describes the function of each button on the
remote control used to control this unit or other
components made by Yamaha or other manufacturers.
■
Common controls
The following buttons can be used no matter which input
source is selected.
1
Infrared signal transmitter
Sends infrared signals.
2
RECEIVER
A
Turns this unit on, or sets it to standby mode.
This button functions only when the
A
(power) button on the
front panel is in the on position.
3
ID
Changes the remote control ID (see page 32).
4
DIMMER
Changes the brightness level of the front panel display.
Choose brightness from 3 levels by pressing this button
repeatedly.
y
This setting is retained even if you turn off this unit.
5
SLEEP
Sets the sleep timer (see page 17).
6
Input selector buttons
Selects the input source and changes the control area (see
page 33).
7
OPTION
Turns the OPTION menu on and off (see page 29).
8
SPEAKERS A/B
Turns on and off the set of speakers connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel of this unit when the corresponding button is
pressed.
9
MUTE
Mutes the sound output. Press again to restore the sound
output to the previous volume level.
0
/–
Increases or decreases the sound output level.
This does not affect the output level of the REC jacks.
A
RETURN
Returns to the previous menu or ends the menu display
when using the Option menu (see page 29).
B
B
/
C
/
D
/
E
/ ENTER
Selects and confirms items in the Option menu (see page
29).
C
CODE SET/RECEIVER
Used to program the remote control so that it can control
your other external components (see page 35).
After using the remote control to control one of your
components, this button is used to switch the remote
control to receiver mode so that remote control commands
will be sent to this unit (see page 34).
D
TP
This button can be used for the Europe model only.
Remote control
Note
Note
