96
R-N500
R-N50
0
Off (default)
Does not set the unit to standby mode
automatically.
2 hours,
4 hours,
8 hours (default),
12 hours
Sets the unit to standby mode when you
have not operated the unit for the specified
time. For example, when “2 hours” is
selected, the unit will switch to standby
mode if you do not operate it for 2 hours.
R - N 5 0 0 X X X X X X
N e t w o r k N a m e
R - N 5 0 0 X X X X X X
Network Name
Edits the network name (the unit’s name on the network)
displayed on other network devices.
1
Select “Network Name”.
2
Press ENTER to enter the name edit display.
3
Use the cursor keys ( / ) to move the edit
position and the cursor keys ( / ) to select
a character.
4
To confirm the new name, press ENTER.
5
To exit from the menu, press SETUP.
Update
Updates the firmware via the network.
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
Sets the initial volume when the receiver is turned on.
Sets the amount of time for the auto-standby function. If
you do not operate the unit for the specified time, the unit
will automatically go into standby mode.
Just before the unit enters standby mode, “AutoPowerStdby”
appears and then countdown starts in the front display.
Enables/disables the eco (power saving) mode.
When the eco mode is enabled, you can reduce the unit’s
power consumption.
• Be sure to press ENTER to restart the unit after selecting a
setting. The new setting will take effect after the unit is
restarted.
• When “ECO Mode” is set to “On”, the front display may
become dark.
• If you want to play audio at high volume, set “ECO Mode” to
“Off”.
Configures the DC OUT jack setting.
Power Mode
Selects how to supply power to the Yamaha AV accessory
connected to the DC OUT jack.
Perform
Update
Starts the process to update the unit’s firmware.
For details, see “Updating the unit’s firmware via
the network”.
Version
Displays the version of the firmware installed on
the unit.
ID
Displays the system ID number.
Max Volume
VOL.
SP A
VOL.
SP A
Network name
VOL.
SP A
Initial Volume
Off (default)
Sets the level to the volume level of the unit
when it last entered standby mode.
Mute
Sets the unit to mute the audio output.
-80.0 dB to
+16.5dB (0.5 dB
increments)
Sets the level to the specified volume level.
AutoPowerStdby
ECO Mode
Off (default)
Disables the eco mode.
On
Enables the eco mode.
Notes
DC OUT
Cont
(default)
Supplies power through the DC OUT jack
continuously regardless of the power state (on/
standby) of the unit.
Sync
Supplies power through the DC OUT jack only
when the unit is turned on.
(B, G models)
(U, C, R, K, A, L, S models)
Summary of Contents for R-N500
