manualshive.com logo in svg

Yamaha R-N2000A, User Manual

Share
Download
Yamaha R-N2000A User Manual Download Page 30

Making bi-wiring connections

Bi-wiring allows output to the speaker woofers (low frequency) and the tweeter/mid-range (mid to high-
frequency) to be split and driven separately. Speakers compatible with bi-wiring are required for these
connections.

1

Remove the short bar or bridge attached to the jacks of the speakers.

2

Connect the product and the speakers as illustrated.

The illustration shows connecting the left channel. Connect the right channel in the same way.

Swapping the connections between speaker jacks A and B is OK.

SPEAKERS L CH

A

B

Rear panel

Speaker

NOTE

(

When the speakers have been bi-wired, it is necessary after turning the product ON to change the speaker setting to A+B before
running YPAO.

(

Use speakers with an impedance of at least 4 Ω and that are compatible with bi-wiring connections.

Related links

(

“Running YPAO” (p.42)

(

“Selecting the output speakers” (p.50)

30

PREPARATION > Connecting speakers

Summary of Contents for R-N2000A























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands