Yamaha R-N2000A User Manual Download Page 19

Page: 19 / 150

AC IN jack

For connecting the included power cord (p.38).

CD IN jacks

For connecting to the analog audio OUT of devices like CD players (p.23).

PHONO IN jacks

GND jack

For connecting to a turntable (record player) (p.23).

LINE 1-2 IN jacks

For connecting to external devices with analog audio OUT (p.23).

PRE OUT jacks

Outputs the same audio signal that is output to the SPEAKERS L/R CH jacks (p.23).

TRIGGER OUT jack

For connecting to external devices that support the trigger function (p.32).

SUBWOOFER OUT jack

For connecting to a subwoofer with a built-in amplifier (p.31).

SERVICE ports

These are service ports that are used when performing repairs, etc. Do not plug anything into them.

NAMES OF PARTS AND THEIR FUNCTIONS > Unit

Summary of Contents for R-N2000A























































































































































Search results

Summary of Contents for R-N2000A

Reviews:

Brands by name

Popular brands

Yamaha R-N2000A, User Manual

Search results

Summary of Contents for R-N2000A

Reviews:

Brands by name

Popular brands