Yamaha QY100 Data Filer, Service Manual

Page: 58 / 80

QY100
58
OMNI MODE ON BnH 7DH
MONO MODE ON BnH 7EH
POLY MODE ON BnH 7FH
(3-3) SYSTEM COMMON MESSAGE
These are transmitted and received as Control Messages for QY100 functions.
They are not recorded as SEQUENCE DATA.
(3-3-1) SONG POSITION POINTER
STATUS 11110010 (F2H)
LSB 0vvvvvvv SONG POSITION LSB
MSB 0vvvvvvv SONG POSITION MSB
Transmitted when you move to a different measure in the SONG PLAY Mode.
Received when in SONG PLAY Standby.
(3-3-2) SONG SELECT
STATUS 11110011 (F3H)
SONG NUMBER 0sssssss SONG NUMBER (PATTERN NUMBER in the PATTERN Mode)
In the SONG PLAY Mode, this will be transmitted when a SONG is switched.
In the PATTERN PLAY Mode, this will be transmitted when a PATTERN is switched.
When in SONG PLAY Mode Standby, PATTERN PLAY Mode Standby, and PLAY, this message is received.
When received in the PATTERN PLAY Mode, the PATTERN will change.
(3-4) SYSTEM REAL TIME MESSAGE
Not recorded as Sequence Data.
(3-4-1) TIMING CLOCK
STATUS 11111000 (F8H)
You can select whether the internal clock will be used as the Timing Clock, or whether Timing Clock
messages from the MIDI IN will be used.
Transmission and reception can be turned On/Off.
(3-4-2) START
STATUS 11111010 (FAH)
Transmission/Reception can be turned On/Off.
(3-4-3) CONTINUE
STATUS 11111011 (FBH)
Transmission/Reception can be turned On/Off.
(3-4-4) STOP
STATUS 11111100 (FCH)
Transmission/Reception can be turned On/Off.
(3-5) SYSTEM EXCLUSIVE MESSAGE
All System Exclusive Messages are recorded and played back.
Even if time intervals existed within the actual data that was received, the entire message between F0
and F7 will be recorded into one timing location.
For playback, an interval time can be specified for each 1K bytes.