M I D I D a t a F o r m a t
46
For PORTAMENTO CONTROL, the portamento time is always fixed at 0.
EFFECT SEND LEVEL 1 controls the Reverb send.
EFFECT SEND LEVEL 3 controls the Chorus send.
EFFECT SEND LEVEL 4 controls the Variation send.
HARMONIC CONTENT adjusts the resonance specified by the Voice. This is a relative parameter, and
specifies an increase or decrease centered at 64. Higher values will produce a more distinctive tone. For
some voices, the effective range maybe less than the range of the setting.
RELEASE TIME adjusts the envelope release time specified by the Voice. This is a relative parameter, and
specifies an increase or decrease centered at 64.
ATTACK TIME adjusts the envelope attack time specified by the Voice. This is a relative parameter, and
specifies an increase or decrease centered at 64.
BRIGHTNESS adjusts the cutoff frequency specified by the Voice. This is a relative parameter, and
specifies an increase or decrease centered at 64. Decreasing the value will make the sound more mellow.
For some voices, the effective range may be less than the range of the setting.
The following Bank Select related operations will all occur when a Program Change is received.
Bank Select MSB:60h-6Fh are not sounded on models which do not support GMx, but since on the
QY100 these are for future expansion of melodic voices, they will be sounded for the present by
MSB00h.
If Bank Select MSB is other than 0,40H, 60H-6FH, 7EH, or 7FH, voice Off will be selected.
If Bank Select MSB = 0,40H, 60H-60FH, 7EH or 7FH is selected, unsupported BANK SELECT LSB
numbers will be ignored.
(3-2) CHANNEL MODE MESSAGES
STATUS
1011nnnn (BnH)
n = 0 ~ 15 VOICE CHANNEL NUMBER
CONTROL NUMBER
0ccccccc
c = CONTROL NUMBER
CONTROL VALUE
0vvvvvvv
v = DATA VALUE
(3-2-1) ALL SOUND OFF (CONTROL NUMBER = 78H , DATA VALUE = 0)
Turns off the sound of all currently sounding notes on the corresponding channel. The status of channel
messages such as Note On and Hold On is also turned off.
(3-2-2) RESET ALL CONTROLLERS (CONTROL NUMBER = 79H , DATA VALUE = 0)
Resets the values of the following controllers.
PITCH BEND CHANGE
0 (center)
AFTER TOUCH
0 (minimum)
MODULATION
0 (off)
AC1 CONTROLLER
0 (minimum)
EXPRESSION
127 (maximum)
SUSTAIN SWITCH
0 (off)
PORTAMENTO SWITCH
1 (on)
SOSTENUTO SWITCH
0 (off)
SOFT PEDAL
0 (off)
NRPN
Un-set status. Internal data will not change.
RPN
Un-set status. Internal data will not change.
PORTAMENT CONTROL
reset
The following data will not change.
PROGRAM CHANGE, BANK SELECT MSB/LSB, VOLUME, PAN.
HARMONIC CONTENT, RELEASE TIME, ATTACK TIME, BRIGHTNESS, DRY SEND LEVEL,
EFFECT SEND LEVEL 1, EFFECT SEND LEVEL 3, EFFECT SEND LEVEL 4,
PITCH BEND SENSITIVITY, FINE TUNING, COURSE TUNING
(3-2-3) ALL NOTE OFF (CONTROL NUMBER = 7BH , DATA VALUE = 0)
Turns off all notes of the corresponding channel which are on. However if Sustain or Sostenuto are on,
the sound will continue until these are turned off.
Summary of Contents for QY100 Data Filer
Page 67: ...M I D I D a t a F o r m a t 67...
