31
Creating an Accompaniment
Deleting Chord Changes
To delete a chord change, move the cursor to the dot on the 1
MEASURE bar corresponding to the change you want to delete,
then press the
[ENTER]
button. An alternative method is to use the
[
h
h
h
h
h
]
and
[
j
j
j
j
j
]
buttons to locate the chord to be deleted, select the
“blank” chord (indicated by a row of flashing blocks), and press
[ENTER]
.
4.
Enter an End Mark and Repeats
4-1.
Move the cursor to the REPEAT pointer (
▲
) to select the repeat
entry mode. Five different types of repeats can be entered at ap-
propriate points to control the flow of your song: start repeat, end/
number of repeats, first ending, second ending, and end song
(listed below).
4-2.
Use the
[
h
h
h
h
h
]
and
[
j
j
j
j
j
]
buttons to locate the measure at which you
want to enter an end mark or repeat, as indicated by the MEAS-
URE number on the display.
DETAIL
End marks and repeats will always be entered either at the
beginning or end of the selected measure (see below).
4-3.
Select the desired end mark or repeat (move the cursor to the
repeat parameter — a row of flashing blocks will appear — and
use the
[-1]
and
[+1]
buttons to select).
Repeat
0
