Yamaha PZ50W, Owner'S Manual

Page: 21 / 88

5-4
ESU05400
Speedometer unit
The speedometer unit is equipped with the following:
● a digital speedometer (which shows the riding speed)
● an odometer (which shows the total distance trav-
eled)
● a tripmeter (which shows the distance traveled since
it was last set to zero)
● an engine speed meter (which shows the engine
speed; not for use while riding)
● warning indicators (which show self-diagnosis, cool-
ant temperature, fuel level, and oil level warnings)
●
indicator lights (which show high beam, low coolant
temperature, and knock control system conditions)
●
a warning light (which shows warnings together with
the warning indicators)
● a fuel meter (which shows the fuel remaining in the
fuel tank)
● a grip/thumb warmer level indicator (which shows the
grip warmer or the thumb warmer level)
After the main switch is turned on, the warning light 1 ,
the low coolant temperature indicator light 2 , the knock
control system “KCS” indicator light
3
, and all segments
of the meter display
4
turn on and off once.
The grip warmer level is initially displayed for 5 seconds,
then the display switches to the fuel meter.
Odometer, tripmeter, and engine speed meter modes
Pushing the “SELECT” button 1 switches the display
between the odometer mode “ODO”, tripmeter mode
“TRIP”, and engine speed meter mode “r/min”.
To reset the tripmeter, push the “RESET” button
2
for at
least 1 second while the tripmeter is displayed.
NOTE:
@
● To switch the speedometer, odometer, and tripmeter
displays between kilometers and miles, select the
odometer mode “ODO”, and then push the “SELECT”
button for at least 10 seconds while the snowmobile
is stopped.
●
Use the engine speed meter only when checking the
snowmobile and performing basic maintenance. The
engine speed meter should not be used while riding
the snowmobile since the reading will vary from the
actual engine speed.
@
E_8gc.book Page 4 Wednesday, May 17, 2006 4:52 PM