manualshive.com logo in svg

Yamaha PZ50FXW, Owner'S Manual

The Yamaha PZ50FXW Owner's Manual is a crucial resource for understanding and maintaining your PZ50FXW model. This comprehensive manual is available for free download from manualshive.com, allowing you to access all the necessary information and instructions conveniently. Get the most out of your Yamaha PZ50FXW with this informative manual.

Share
Download
background image

5-6

Grip/thumb warmer level indicator

The grip warmer indicator 

1

 comes on and the display

switches to the grip warmer level when the grip warmer
side of the grip/thumb warmer adjustment switch 

2

 is

pressed. 
The thumb warmer indicator 

3

 comes on and the dis-

play switches to the thumb warmer level when the thumb
warmer side of the grip/thumb warmer adjustment switch
is pressed.

NOTE:

@ 

●

The grip/thumb warmer level is displayed for 5 seconds
after releasing the grip/thumb warmer adjustment
switch, then the display switches to the fuel meter. 

●

When the engine is started, the grip/thumb warmer
levels are set to the levels saved when the engine
was stopped. 

@ 

ESU04260 

Fuel level warning indicator

The fuel level warning indicator indicates a malfunction-
ing sensor, disconnected coupler, broken lead, or short
circuit when detected by the self-diagnosis device of the
snowmobile.
The fuel level warning indicator 

1

, warning light 

2

, and

all segments of the fuel meter 

3

 warn the rider of the

above problems by flashing continuously. 
When this occurs, have a Yamaha dealer inspect the
snowmobile as soon as possible. 

ESU03770 

Oil level warning indicator

The oil level warning indicator 

1

 and the warning light 

2

come on when the engine oil level is low. 
If the oil level warning indicator and the warning light
come on, place the snowmobile on a level surface and
allow it to idle for one minute. 
If the oil level warning indicator and the warning light go
off, the engine oil level is sufficient, however it is getting
low. Add engine oil as soon as possible. 
If the oil level warning indicator and the warning light do
not go off, check the engine oil level in the oil tank (see
pages 6-3–6-4), and add engine oil if necessary. 

E_8gk.book  Page 6  Friday, June 16, 2006  9:53 AM

Summary of Contents for PZ50FXW









































































































Reviews:

No comments

Related manuals for PZ50FXW

Brands by name

Popular brands

Load more brands