88
PSR-S975/S775 Reference Manual
7
Re
g
is
tra
tio
n
M
e
m
o
ry
6
Use the [D] (SEQUENCE END) button to determine how Registration Sequence
behaves when reaching the end of the sequence.
• STOP
............... Pressing the TAB [
F
] button or the “advance” pedal has no effect. The sequence is
“stopped.”
• TOP
.................. The sequence starts again at the beginning.
• NEXT BANK
... The sequence automatically moves to the beginning of the next Registration Memory Bank
in the same folder.
7
Press the [F] (REGIST SEQ. ENABLE) button to turn the Registration Sequence
function on.
8
Press the [EXIT] button to exit from the operation display.
After the confirmation message appears, press the [G] (YES) button to store the Registration Sequence
program temporarily.
NOTICE
Keep in mind that all Registration Sequence data is lost when changing Registration Memory Banks, unless you’ve saved it with the Reg-
istration Memory Bank file. For instructions on saving, see the section below.
Saving the Registration Sequence Settings
The settings for the Sequence order and how Registration Sequence behaves when reaching the end of the
sequence (SEQUENCE END) are included as part of the Registration Memory Bank file. To store your
newly programmed Registration Sequence, save the current Registration Memory Bank file.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to call up the
REGISTRATION BANK Selection display.
2
Press the [6
] button of MENU 2 to save the Bank file.
For details, refer to “Basic Operations” in the Owner’s Manual.
[1
]–
[4
]
Moves the cursor.
[5
]
REPLACE
Replaces the number at the cursor position with the currently selected Registra-
tion Memory number.
[6
]
INSERT
Inserts the number of the currently selected Registration Memory number to the
cursor position.
[7
]
DELETE
Deletes the number at the cursor position.
[8
]
CLEAR
Deletes all numbers in the sequence.
