41
PSR-S550/PSR-S550B
This operation saves user Songs (Song numbers 001-005) or user Styles to USB flash memory.
Songs are saved in SMF Format 0.
1
Make sure that a properly formatted
USB flash memory device has been
properly connected to the instrument's
USB TO DEVICE terminal, and that the
"CONNECT" message is shown in the
MAIN display.
2
Press the [FILE MENU] button.
3
Use the CATEGORY [ ] and [ ] buttons
to locate the User Song or User Style
Save item.
The SOURCE FILE-a user Song name or a user
Style name-will be highlighted.
4
Use the dial to select the source user
Song or Style.
You can press the [+/YES] and [-/NO] buttons
simultaneously to select the first user Song or
Style.
5
The destination Song or Style will be high-
lighted, and a default name will appear for the
converted Song or Style file.
Press the [EXECUTE] button.
6
Press the [EXECUTE] button. A cursor
will appear below the first character in
the file name.
7
Refer to"Saving the Registration Data"
for filename entry.
Change the file name as necessary.
8
Press the [EXECUTE] button. The display
prompts you for confirmation.
You can cancel the save operation at this point
by pressing the [-/NO] button.
9
Press the [EXECUTE] button again, or the
[+/YES] button, and the save operation will
begin.
The user Song will be stored to the USER FILE
folder in the USB flash memory device.
10
A message appears in the display indicating
that the operation is complete.
Press the [EXIT] button to return to the MAIN
display.
Saving a User Song or User Style
What is SMF (Standard MIDI File)?
The SMF (Standard MIDI File) format is one of the
most common and widely compatible sequence
formats used for storing sequence data. There are
two variations: Format 0 and Format 1. A large
number of MIDI devices are compatible with SMF
Format 0, and most commercially available MIDI
sequence data is provided in SMF Format 0.
The source user Song name.
To Overwrite an Existing File
If you want to overwrite a file that already exists
on the USB flash memory device, use the dial or
the [+/YES] and [-/NO] buttons to select the
file, then skip ahead to step 8.
The name of the file to be saved
Cursor
Once the save-in-progress message appears in the display,
the operation cannot be canceled. Never turn off the power
or remove the USB flash memory during this operation.
CAUTION
•
If an existing filename is specified, the display prompts you for con-
firmation. Press [EXECUTE] or [+/YES] if it is OK to overwrite the
file, or [-/NO] to cancel.
•
The amount of time it will take to perform the save operation
depends on the particular USB flash memory device you are using.
NOTE
•
Summary of Contents for PSR-S550B
Page 23: ...23 PSR S550 PSR S550B Pattern Side パターン側 2NA WH33370 DM Circuit Board ...
Page 29: ...29 PSR S550 PSR S550B 2NA WH50940 to PNL CN101 B B B B Pattern Side パターン側 PNC Circuit Board ...
Page 31: ...31 PSR S550 PSR S550B B B B B to PNL CN102 Pattern Side パターン側 2NA WH50940 PNR Circuit Board ...
