39
PSR-S550/PSR-S550B
A new USB flash memory device must be formatted before it can be used by this instrument.
1
2
Press the [FILE MENU] button.
3
The display prompts you for confirmation.
4
5
6
Formatting USB Flash Memory
• If you format a USB flash memory that already contains data, all of
the data will be erased. Be careful not to erase important data
when using the format function.
CAUTION
• Once the format-in-progress message appears in the display,
the format operation cannot be canceled. Never turn off the
power or remove the USB flash memory device during this
operation.
CAUTION
• If the USB flash memory device has been write-protected, an appro-
priate message will appear in the display and you will not be able to
execute the operation.
NOTE
After connecting the USB flash memory to be
formatted to the instrument’s USB TO DEVICE
terminal, check that the “CONNECT” message
is shown in the MAIN display.
Use the CATEGORY [ ] and [ ] buttons to
select the Format item.
Press the [EXECUTE] button and the display
prompts you for confirmation.
You can press the [-/NO] button at this point to
cancel the operation.
Press the [EXECUTE] button again, or the
[+/YES] button, and the format operation will
begin.
A message appears in the display indicating
that the operation is complete.
Press the [EXIT] button to return to the MAIN display.
Summary of Contents for PSR-S550B
Page 23: ...23 PSR S550 PSR S550B Pattern Side パターン側 2NA WH33370 DM Circuit Board ...
Page 29: ...29 PSR S550 PSR S550B 2NA WH50940 to PNL CN101 B B B B Pattern Side パターン側 PNC Circuit Board ...
Page 31: ...31 PSR S550 PSR S550B B B B B to PNL CN102 Pattern Side パターン側 2NA WH50940 PNR Circuit Board ...
