Playing a Variety of Instrument Voices
PSR-I300 Owner’s Manual
22
Re
fe
re
n
c
e
To adjust the Harmony Volume:
Call up Function number 029 (page 55).
To adjust the Arpe
gg
io Velocity:
Call up Function number 030 (page 55).
Holdin
g
the Arpe
gg
io Playback via the
Footswitch (Hold)
You can set the instrument so that Arpeggio play-
back continues even after the note has been
released, by pressing the footswitch connected to the
[SUSTAIN] jack.
1
Press the [FUNCTION] button a number
of times until the “PdlFunc” (Function
031; pa
e 56) item appears on the dis-
play.
After “PdlFunc” is shown for a few seconds, the
current setting is shown.
2
Use the number buttons [1]–[3], [+/YES],
[-/NO] buttons to select “ArpHold.”
If you want to restore the footswitch function to
sustain, select “Sustain.” If you want to use both
hold and sustain functions, select “Sus+ArpH.”
3
Try playin
g
the keyboard with Arpe
gg
io
playback usin
g
the footswitch.
Even if you release the notes, Arpeggio playback
will continue. To stop Arpeggio playback, release
the footswitch.
How to play the various Types
• Harmony Types 001 to 005
Press the right-hand keys while playing chords in the
auto accompaniment range of the keyboard when
Auto Accompaniment or Riyaz Lite are on (page 25).
• Harmony Types 006 to 012 (Trill)
Hold down two keys.
• Harmony Types 013 to 019 (Tremolo)
Keep holding
down the keys.
• Harmony Types 020 to 026 (Echo)
Play the keys.
• Arpeggio Types 027 to 188
Arpeggio function applies to both the Main
Voice and Dual Voice.
Arpeggio function applies only to the Split
Voice.
When Split is off:
When Split is on:
• Selecting a Voice number between 280 and 299 as
the Main Voice will turn on Arpeggio and Split auto-
matically.
NOTE
For 01–05, the harmony notes are added to notes
played with the Main Voice by turning the Auto Accom-
paniment on and playing the chord in the left-hand
area. For 06–26, the corresponding effect is applied to
notes played with the Main Voice whether Auto Accom-
paniment is on or off. For 27 and later, Arpeggio play-
back is applied to notes played according to the Split
on/off status.
PdlFunc
031
Sustain
1
031
ArpHold
2
031
