Yamaha PSG-01S, User Manual

Page: 11 / 24

11
OP
ERA
T
IO
N
S
Follow the procedure below to select an application to be
started by clicking "Go" in "SHORTCUT".
1
In the P S G-01 S Controller screen, click
the Home tab.
2
In " S HORTCUT", select " S elect
application".
3
S elect the desired application and then
click "Open".
Follow the procedure below to select a function to be
activated when this unit is shaken.
1
In the P S G-01 S Controller screen, click
the General setting tab.
2
In “ S hake”, select a function to be
assigned.
Open/close P S G-01 S Controller:
Select this if you want to open or close the PSG-01S
Controller
Maximize audio level:
Select this if you want to set the volume to the maximum.
OFF:
Select this if you do not use the shake function.
■
When shaking this unit
Jiggle this unit up and down to activate the selected
function. Be careful not to remove the USB cable during
shaking.
Follow the procedure below to switch the USB bandwidth
usage. This unit restarts automatically when you change
this setting.
1
In the P S G-01 S Controller screen, click
the General setting tab.
2
In "Bandwidth usage", select " S tandard
(stereo)" or "Narrow band (monaural)".
If this unit is connected to a PC/Mac conjunction with
other USB devices such as Web camera, this unit may
operate abnormally. In this case, select "Narrow band
(monaural)".
•
While this unit is operating in a narrow band, it plays back
audio in monaural even in "Relax style".
•
You cannot switch the USB bandwidth usage during a Skype
call.
•
In case that you cannot adjust the speaker volume or
microphone sensitivity after switching the USB bandwidth
usage, disconnect the USB cable and reconnect it.
To uninstall the PSG-01S Controller from the PC, select
[Start] - [All Programs] - [Yamaha PSG-01S] - [Uninstall
PSG-01S Controller].
When you use Windows 7 or Windows Vista, a warning
message regarding uninstallation may appear. Click
"Allow" to continue the uninstallation because Yamaha
has already confirmed the operation.
To uninstall the PSG-01S controller, log on with the user account
used for setup.
To uninstall the PSG-01S Controller from the Mac, select
[Go] - [Applications] from the Finder menu bar and then
drag the "Yamaha PSG-01S" folder to the trash icon.
To uninstall the PSG-01S controller, log on as a user with the
Administrator rights.
Configuring SHORTCUT
Configuring the shake
function
Switching the USB
bandwidth usage
Notes
Uninstalling the PSG-01S
Controller
Note
Uninstalling the PSG-01S
Controller
Note