manualshive.com logo in svg

Yamaha PortaTone PSR-8000, Owner'S Manual

The Yamaha PortaTone PSR-8000 is a versatile and powerful keyboard synthesizer designed for professional musicians. Unlock the full potential of this instrument by downloading the comprehensive and informative Owner's Manual, available for free download from our website. Master your music with this essential manual, exclusively at manualshive.com.

Share
Download
background image

148

,,,,,,,,,,,,,,,,,,

,,,,,,,,,,,,,,,,,,

QQQQQQQQQQQQQQQQQQ

QQQQQQQQQQQQQQQQQQ

¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

,,,,,,,,,,,,,,,,,,

,,,,,,,,,,,,,,,,,,

,,,,,,,,,,,,,,,,,,

QQQQQQQQQQQQQQQQQQ

QQQQQQQQQQQQQQQQQQ

QQQQQQQQQQQQQQQQQQ

¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

Troubleshooting

Symptom

Noise is heard when the power is turned on
or off.

No sound.

The sound can’t be adjusted by some mixing
console controls.

The accompaniment does not start.

Some notes do not sound or are prema-
turely cut off.

When a voice is changed, the previously
selected effect is changed.

There is a slight difference in sound quality
between notes played on the keyboard.

Some voices have a looping sound.

Some noise or vibrato is noticeable at higher
pitches, depending upon the voice.

Some voices will jump an octave in pitch
when played in the upper or lower registers.

The auto-accompaniment chord does not
change even when a different chord is
played or the chord is not recognized.

Possible Cause/Solution

This is a normal result of the power surge that occurs when the unit
is turned on or off, and is not a problem.

The volume controls or foot volume are turned all the way down.
Set the volume controls (both the master volume control and the
mixing console part volume controls) and foot volume to a reason-
able listening level.

Are the desired parts turned on?

A pair of headphones is plugged into the PHONES jack. Unplug the
headphones.

A plug is inserted in the LOOP SEND jacks. Unplug the LOOP SEND
jacks.

Is the FOOT SWITCH connected to the FOOT VOLUME connector?

The FADE OUT switch is on and has reached the end of its duration,
muting the sound. Press the FADE IN/OUT switch so that its indicator
goes out.

MIDI local control is turned OFF. Turn MIDI local control ON using the
appropriate F9 MIDI function.

Make sure that the [TALK] button is not engaged. The TALK settings
take precedence when TALK is engaged. See page 130.

The MIDI CLOCK setting is set to EXTERNAL. Reset the MIDI
CLOCK to INTERNAL using the appropriate F9 MIDI function.

The maximum polyphony has been exceeded. You can play up to 64
notes at the same time—including auto-accompaniment, song
playback, multi pad notes etc.. Notes exceeding this limit will not
sound. When using AUTO ACCOMPANIMENT or HARMONY/ECHO,
be careful not to exceed the limit.

This is normal, each voice has its own suitable preset values which
are automatically recalled when the corresponding F4 VOICE SET
parameters are turned on (page 128).

This is normal and is a result of the PSR-8000’s sampling system.

Some voices have a pitch limit which, when reached, causes this
type of pitch shift. This is normal.

Are you sure you’re playing on the left-hand section of the keyboard?

You may be using single-finger type fingering in the fingered mode,
or vice-versa. Use the correct type of chord fingering for the selected
auto-accompaniment fingering mode.

Is the auto-accompaniment fingering mode set to MANUAL BASS?

Troubleshooting

Summary of Contents for PortaTone PSR-8000















































































































































































































Reviews:

No comments

Related manuals for PortaTone PSR-8000

Oakton PC 300 Instruction Manual preview
PC 300
Brand: Oakton Pages: 69
Mini SPARE AIR Owner'S Manual preview
SPARE AIR
Brand: Mini Pages: 20
ICS Schneider Messtechnik Snap 41 Instruction Manual And Safety Information preview
Snap 41
Brand: ICS Schneider Messtechnik Pages: 40
Lasertec TruPulse L2 Quick Reference Field Manual preview
TruPulse L2
Brand: Lasertec Pages: 21
bentrup TM 100 Operating Instructions Manual preview
TM 100
Brand: bentrup Pages: 9
Mic 98871 Operation Manual preview
98871
Brand: Mic Pages: 2
Dive Gear Express DGX Gears XTRA Regulator Service Manual preview
DGX Gears XTRA Regulator
Brand: Dive Gear Express Pages: 26
Xylem Sensus iPERL Installation Manual preview
Sensus iPERL
Brand: Xylem Pages: 10
Lasertec HV2R Instruction Manual preview
HV2R
Brand: Lasertec Pages: 32
IDEAL 61-920 Instruction Manual preview
61-920
Brand: IDEAL Pages: 20
Laserworld GREEN-4000 532 Manual preview
GREEN-4000 532
Brand: Laserworld Pages: 5
XS Instruments 70 Vio Series Instruction Manual preview
70 Vio Series
Brand: XS Instruments Pages: 41
KEYBOARDPARTNER HX3 Drawbar Expander Version 5 Manual preview
HX3 Drawbar Expander Version 5
Brand: KEYBOARDPARTNER Pages: 11
Vertiv Liebert MBX Busway Installer/User Manual preview
Liebert MBX Busway
Brand: Vertiv Pages: 16
Magnusson V10523 Manual preview
V10523
Brand: Magnusson Pages: 96
Velleman NETBPEM3 User Manual preview
NETBPEM3
Brand: Velleman Pages: 21
Komshine KPM-35 User Manual preview
KPM-35
Brand: Komshine Pages: 2
IFM Electronic efector300 SM0510 Operating Instructions Manual preview
efector300 SM0510
Brand: IFM Electronic Pages: 45

Brands by name

Popular brands

Load more brands