1 1
FUNCTION
EXIT
HARMONY
TYPE
OCTAVE
CHANGE
TRANSPOSE/
TUNE
s
t
<
>
A. B. C. MODE
+
–
+
–
“RECALL INITIAL DATA
1
Data=AllData
-Execute-
FUNCTION
EXIT
■
Before You Begin
Before playing your PSR-5700 for the first time, it might be a good idea to re-
initialize it to the original factory settings just in case these have been changed at
some point before you receive the instrument. To do this, press the [FUNCTION]
button a few times until “F6” appears on the LED display (this is the UTILITY
mode). Now press the [
t
] button (HARMONY TYPE) to the right of the LCD panel
a few times until the following display appears:
Selecting & Playing Voices
+
–
“RECALL INITIAL DATA
1
Data=AllData
Busy!
Press both the right [-] and [+] buttons under “-Execute-” on
the display simultaneously. “Busy!” will appear while the ini-
tialization is taking place, and “Completed” will appear when the
initialization is complete. Finally, press the [EXIT] button to
return to the normal play mode.
Z
Turn Power On and Set Initial
Volume
VOLUME
MIN
MAX
ORCH.
1
ORCH.
2
CHORD
1
CHORD
2
BASS
RHYTHM
MASTER
Press the [POWER] button to turn the power ON, and set all seven VOL-
UME controls about three-quarters of the way toward their MAX settings.
You can set the [MASTER] VOLUME control for the most comfortable
overall volume level after beginning to play.
No sound will be produced if all volume controls other than the MASTER control
are set to their minimum positions.
Playing the PSR-5700
DETAIL
Summary of Contents for Portatone PSR-5700
Page 56: ......
