MIDI Functions
74
3
Select the Initial Setup Send operation.
Press “2” on the numeric keypad or use the [+]/[-] buttons to select operation
#2, Initial Setup Send.
4
Press the [START/STOP] button.
Start the Initial Setup Send operation.
5
Start recording on the sequencer, then send the Initial
Setup data.
Start recording on the sequencer in the normal way, then — with as little
delay as possible — press the [+] button to actually start transmitting the
data.
An “End” message briefly appears in the display when the operation is com-
plete.
6
Stop recording on the sequencer.
Stop recording on the sequencer in the normal way. Make sure that any sub-
sequently recorded performance data is recorded at least one measure fol-
lowing the Initial Setup data.
INIT SND
2
End
• When the Initial Setup Send
operation is completed, the PSR-
282 automatically returns to the
previous panel condition.
Summary of Contents for Portatone PSR-282
Page 1: ......