Yamaha PortaTone PSR-1700, Owner'S Manual

Page: 78 / 94

76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
MIDI Transmission
The PSR-1700/PSR-2700 allows independent MIDI transmit channels to be assigned to the L and R ORCHES-
TRATION voices. It is also possible to independently turn local control and MIDI output on or off for the L and R
voices.
MIDI
■
MIDI Transmit Channels
The L and R ORCHESTRATION voices can be independently set to transmit on any of the 16 MIDI channels as
follows: Z
Press the [L] or [R] TRANSMIT CH
Press the [L] button if you want to set the L voice transmit channel, or the [R]
to set the R voice transmit channel. The currently selected channel for the selected
voice will appear on the LCD display panel.
Use the [+] and [–] buttons, the number buttons, the data dial, or the [L] or [R]
button itself to select the desired transmit channel.
X
Select the Desired Transmit Channel ...................................................................................................
NOTES
• The currently selected transmit channel is retained in memory even when the power switch is
turned off, as long as backup batteries are installed or an AC plug is connected.
• To record the Song Memory data to an external sequencer, start the sequencer running in the
record mode, press the [RESET] button, and then press the [PLAY/STOP] button.
• To record the Auto Accompaniment data to an external sequencer, start the sequencer run-
ning in the record mode, select the style you want to record, then start Auto Accompaniment
playback.
• Notes played on the keyboard are transmitted on channel 1 or 2 (selectable), Auto Accompa-
niment data is transmitted on channels 10 through 16, and Song Memory data is transmitted
on channels 3 through 8.
Normally the Auto Accompaniment Rhythm 1 and Rhythm 2 tracks are both transmitted on
channel 10. To transmit these tracks separately, hold the C1 key while turning the power on.
When this is done the Rhythm 1 data will be transmitted on channel 9 and the Rhythm 2 data
will be transmitted on channel 10.
0 1
– +
RESET
TRANSMIT
CH
L R
LOCAL /
MIDI OUT
LOCAL
MIDI
OUT
The [LOCAL/MIDI OUT] buttons and indicators below the TRANSMIT CH [L] and [R] buttons can be
used to turn local control and MIDI output ON or OFF as required. The status of the LOCAL and MIDI OUT
indicators changes as shown below each time the corresponding [LOCAL/MIDI OUT] button is pressed:
NOTES
• When “LOCAL” control is turned ON (indicator lit), the PSR-1700/PSR-2700 is controlled by
its own keyboard. When “LOCAL” control is off, playing the keyboard produces no sound — it
can only be played by MIDI data received via the MIDI IN terminal.
• When MIDI OUT is turned ON (indicator lit), operating the PSR-1700/PSR-2700 produces
corresponding MIDI output. When MIDI OUT is turned OFF (indicator out) no MIDI output is
produced by the PSR-1700/PSR-2700.
• LOCAL & MIDI OUT ON/OFF controls note on/off only. All other data is always output auto-
matically.
• Since LOCAL & MIDI OUT ON/OFF status is memorized in the Registration Memory, you can
select the tone generator to be used (PSR-1700/PSR-2700 or an external tone generator) by
changing the registration memory.
• Auto accompaniment will not function when Left LOCAL OFF is selected. Auto accompani-
ment note on/off data will not be output when Left MIDI OUT OFF is selected.
LOCAL /
MIDI OUT
TRANSMIT
CH
L R
LOCAL
MIDI
OUT
■
Local & MIDI Output ON/OFF
NOTES
• After selecting L or R, as described above, the default transmit channel can be
recalled by simultaneously pressing the [+] and [–] buttons. The default “L”
channel number is “2”, and the default “R” channel is “1”.
PSR-2700 PSR-1700
MIDI TxCh R=0 –1
08:Showtune 001:GrandPno
AccOff MIDI TxCh R=0 –1