Quic
k Guide
PSR-3000/1500 Owner’s Manual
27
About PRESET/USER/CARD
PRESET .............. Internal memory to which the preprogrammed data are installed as preset data.
USER ................. Internal memory that allows both reading and writing of data.
CARD ................ For transferring data to and from SmartMedia, with the PSR-3000/1500’s card slot.
n
When the USB storage device such as the Floppy Disk drive will be connected to the USB [TO DEVICE] connector,
“USB1” will be displayed on the File Selection display.
Several Songs may be together in a
folder. In this case, the folder(s) will
appear in the display (see the illustration
at right). Press one of the [A]–[J] buttons
to select a folder.
When the drive contains more than ten Songs, the display is divided up into several pages. The page indica-
tions are shown at the bottom of the display. Press one of the [1
π
]–[6
π
] buttons to select a page.
You can also select a Song by using the [DATA ENTRY] dial, then press the [ENTER] button to execute.
Operation of the Function Display
In the Function display, you can make detailed settings.
In the example here, we’ll call up and use the keyboard touch sensitivity setting display.
Categories of detailed settings are shown.
1
Press the [SONG SELECT] button to call up the Song Selection display.
2
Press the TAB [
√
]/[
®
] buttons to select the desired drive (PRESET/USER/CARD).
3
Select a folder (if necessary).
4
Select a page (if the display has several pages).
5
Press one of the [A]–[J] buttons to select a Song.
6
Press the [EXIT] button to return to the previous display.
1
Press the [FUNCTION] button.
*Note that VIDEO OUT is available only on the PSR-3000.
