Making Global and Other Important Settings — Function
145
PSR-2100/1100
The explanations here apply to step #3 of the procedure on page 136.
Specifying the Order for Calling Up Registration Memory Presets —
Registration Sequence
You can save your custom panel settings to the Registration Memory presets, and call them up by pressing the
appropriate REGISTRATION MEMORY buttons
[1]
-
[8]
. The convenient Registration Sequence function lets you call up
the presets in any order you specify, by simply using the
[BACK]
/
[NEXT]
buttons or the pedal as you play.
Maintaining Panel Settings — Freeze
This lets you specify the settings you want to be maintained or left unchanged, even when changing Registration
Memory presets. For details, see page 89.
Setting the Registration Sequence, Freeze, and Voice Set
I
F
J
G
H
D
A
E
B
C
8
1
2
3
4
5
6
7
Turns the Registration
Sequence function
on/off. When this is
set to “ON,” the
programmed
Registration
Sequence is shown at
the top right of the
Main display, and you
can step through the
sequence in this
display by using the
[BACK]/[NEXT]
buttons or the pedals.
Determines which pedal is used to advance
(increment) through the sequence.
Determines which
pedal is used to
reverse (decrement)
through the sequence.
Determines how Registration
Sequence behaves when
reaching the end of the
sequence.
Stop
Pressing the [NEXT] button or
the “advance” pedal has no
effect. The sequence is
“stopped.”
Top
The sequence starts again at
the beginning.
Next Bank
The sequence automatically
moves to the beginning of the
next Registration Memory bank
in the same folder.
Indicates the file name of the selected
Registration Memory bank.
Indicates the Registration Memory preset
numbers, in the order of the current
Registration Sequence.
These move the cursor position in the sequence.
Replaces the number at the cursor position with the
currently selected Registration Memory number.
Inserts the number of the currently
selected Registration Memory preset
immediately before the cursor position.
Deletes the number at the
cursor position.
Deletes all Registration
Memory numbers in the
sequence.
When you are using the pedal
to call up specified presets, you
can easily reset the Registra-
tion Sequence and go back to
the first entry by holding down
the pedal for a few seconds
(the red box indicator at the top
right of the MAIN display goes
out). Press and release the foot
pedal to re-select the first entry
in the sequence.
n
Setting Registration Sequence
Enable to “ON” overrides any
other Pedal settings (for ped-
als assigned to “Regist (+)
Pedal” and “Regist (-) Pedal”
here). These include the pedal
settings on page 142, and in
Voice Set on page 146.
n
When both “Regist (+) Pedal”
and “Regist (-) Pedal” are set
to “OFF,” the pedals cannot be
used to step through the Reg-
istration Sequence; only the
[BACK]/[NEXT] buttons can
be used in the MAIN display.
n
When both “Regist (+) Pedal”
and “Regist (-) Pedal” are set
to the same pedal, “Regist
(+) Pedal” takes priority.
Registration Sequence data
is included as part of the
Registration Memory bank
file. To save your newly pro-
grammed Registration
Sequence, store the current
Registration Memory bank
file (page 38, 47). Any Regis-
tration Sequence data is lost
when changing Registration
Memory banks, unless
you’ve stored it with the Reg-
istration Memory bank file.
Execute the settings by pressing the [EXIT] button.
E
ND
Summary of Contents for Portatone PSR-1100
Page 172: ...Index PSR 2100 1100 172 MEMO...
