Selecting and Playing Songs
54
The convenient A-B Repeat function is an ideal aid for practicing and learning. It
allows you to specify a phrase of a song (between point A and point B) and repeat
it — while you play or practice along with it.
1
While playing a song, set point A (the start point).
During playback, press the [
] button once, at the beginning point to
be repeated.
2
Set point B (the end point).
As the song continues playing, press the [
] button once again, at the
ending point to be repeated. The selected phrase repeats indefinitely until
stopped.
3
Pause or stop playback as needed.
Use the [
❙
❙
] button or [START/STOP] button. Stopping playback does not
cancel the set A/B points or the A-B Repeat function.
4
Turn off the A-B Repeat function.
Press the [
] button.
A-B Repeat
A-
REPEAT
006
006
• The A and B points can only be
specified at the beginning of a
measure (beat 1), and not at any
point in the middle of a measure.
• To set the A point to the begin-
ning of a song, press the
[
] button before starting
playback.
• If you’re repeat practicing a par-
ticularly difficult section, try slow-
ing down the Tempo to an
appropriate speed to make it eas-
ier to play and master the part.
You may also want to slow down
the Tempo while setting the A
and B points; this makes it easier
to accurately set the points.
• You can also set the A-B Repeat
function when the song is
stopped. Simply use the [
r
]
and [
f
] buttons to select the
desired measures, pressing the
[
] button for each point,
then start playback.
A-b
REPEAT
012
012
