POCKETRAK 2G
7
The Removable Disk is not displayed when the unit is connected to the PC.
Possible cause
Corrective action
The unit is not connected to the PC correctly.
Make sure the connection is correct.
Disconnect the unit from the PC and reconnect it again.
Possible cause
Corrective action
Sufficient power is not being supplied from the PC to the unit.
If a USB hub is being used, reconnect the unit directly to the USB terminal on the PC. If the PC is equipped
with several USB terminals, try another terminal.
Possible cause
Corrective action
A network drive has been assigned.
If a network drive has been assigned, the drive letter (the letters used as drive names) is already taken, so
the Removable Disk cannot be created. Change the network drive assignments and reconnect the unit. Talk
to your network administrator about reassigning network drives.
Possible cause
Corrective action
Playback is locked with the security setting turned on.
Cancel the playback lock and connect the unit to the PC with the unit’s power turned on.
Cannot recharge the eneloop.
Possible cause
Corrective action
The BATTERY SETTING is set to “ALKALINE.”
Set the BATTERY SETTING to “eneloop”.
Possible cause
Corrective action
Connecting the unit to the PC does not cause the battery to be recharged.
Press the
Y
Y
Y
Y
Y
button for at least two (2) seconds.
A file can’t be erased.
Possible cause
Corrective action
The attribute of the file is set to “read only”.
Connect the unit to the PC and change the file attribute or erase the file from the PC. Alterna-tively, format
(initialize) the built-in memory.
[ERROR FILE SYSTEM] is displayed and nothing else happens.
Possible cause
Corrective action
FAT administration system error.
Format (initialize) the built-in memory.
Cannot select the S folder.
Icon “
” appeared when you attempted to recharge the battery.
Possible cause
Corrective action
You attempted to recharge a battery other than the eneloop.
You attempted to recharge the battery, but the battery had not been inserted.
Insert the eneloop battery into the unit.
Possible cause
Corrective action
The unit is overheated.
Disconnect the unit from the PC, let the unit cool down for a while, then try to recharge again.
Corrective action
Press and hold down the FOLDER/INDEX button while the unit is stopped.
