background image

PM1D Manager V2 for Windows Owner’s Manual

10

Communication between PM1D Manager and the console/engine

If you connect the console/engine and the PC, you can use PM1D Manager as a supplementary controller for 
the system.

Online

” refers to a state in which the console/

engine and the PC are connected by a cable, and data 
can be transferred to control the device immediately.

Offline

” refers to a state in which the console/

engine and the PC are not connected by a cable and 
therefore are unable to communicate, or a state in 
which the cable is connected but communication has 
not begun.

In the online state, parameters (with some excep-
tions) will be linked between the console/engine and 
the PC, allowing PM1D Manager to monitor the 
state of the system, operate it remotely, and act as a 
substitute in the event of device failure. The material 
that follows will explain various ways of setting up 
the system, and how data communications can be 
established and terminated.

System connection examples

Example 1: Standard mode (connect the PC 
to the console)

Console

×

1, Engine

×

1

Example 2: Standard mode (connect the PC 
to the engine)

Example 3: Mirror mode (connect the PC to 
the console)

Console

×

1, Engine

×

2 (mirror mod

e

)

Example 4: Mirror mode (connect the PC to 
the engine)

Console

×

1, Engine

×

2 (mirror mode)

The PC can only be connected to the engine that is 
selected in Mirror mode. In this example, ENGINE A 
is used.

The PC can only be connected to the engine that is 
selected in Mirror mode. In this example, ENGINE B 
is used.

Example 5: Normal mode (connect the PC to 
the engine)

Engine

×

1

• Only one PC can be connected to a system. It is not possi-

ble to connect multiple PC’s to a system.

• Depending on the device to which the PC is connected, or 

depending on the structure of the system, the functional-
ity of PM1D Manager may be partially limited. For 
details, refer to “PC connections in a system that includes 
a console” (

p.21).

CONSOLE

(CS1D)

ENGINE

(DSP1D)

CONSOLE

(CS1D)

ENGINE

(DSP1D)

CONSOLE

(CS1D)

ENGINE A

(DSP1D)

ENGINE B

(DSP1D)

CONSOLE

(CS1D)

ENGINE A

(DSP1D)

ENGINE B

(DSP1D)

CONSOLE

(CS1D)

ENGINE A

(DSP1D)

ENGINE B

(DSP1D)

ENGINE

(DSP1D)

Summary of Contents for PM1D Manager V2

























Reviews: